All MIBs › TY1250I-MIB › ty1250DiagDteV54Lpbk
ty1250DiagDteV54Lpbk
Module: TY1250I-MIB
OID (symbolic): TY1250I-MIB::ty1250DiagDteV54Lpbk
OID (numeric): 1.3.6.1.4.1.466.3.12.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This selection displays the status of the DTE Channel V.54 Loopback for the channel. This loopback is initiated by the remote node, causing this node to loop data back to the remote node.
What is ty1250DiagDteV54Lpbk?
Read-only status of a V.54 loopback on the DTE channel: loopback-enable (1) or loopback-disable (2). This loopback is initiated by the remote node (causing this node to loop data back), so admins use this object only to observe its state.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.466.3.12.6 snmpwalk -v2c -c public <target> TY1250I-MIB::ty1250DiagDteV54Lpbk
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.466.3.12.6.1 snmpget -v2c -c public <target> TY1250I-MIB::ty1250DiagDteV54Lpbk.1
Start monitoring TY1250I series circuit/network device (hardware/software revision and module-inventory status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TY1250I-MIB::ty1250DiagDteV54Lpbk OID value, configure state conditions and alerts, and monitor any TY1250I series circuit/network device (hardware/software revision and module-inventory status) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.466 | tylink | TY1250I-MIB |
| 1.3.6.1.4.1.466.3 | ty1250 | TY1250I-MIB |
| 1.3.6.1.4.1.466.3.12 | ty1250DiagDteTable | TY1250I-MIB |
| 1.3.6.1.4.1.466.3.12.6 | ty1250DiagDteV54Lpbk | TY1250I-MIB |