All MIBs › TY1250I-MIB › ty1250DiagDteSigDTR
ty1250DiagDteSigDTR
Module: TY1250I-MIB
OID (symbolic): TY1250I-MIB::ty1250DiagDteSigDTR
OID (numeric): 1.3.6.1.4.1.466.3.12.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The Dte Channel DTR signal. Values are dtr-signal-on (1) and dtr-signal-off (2).
What is ty1250DiagDteSigDTR?
Reports the current state of the DTE channel's DTR signal: dtr-signal-on (1) or dtr-signal-off (2). It's useful for confirming whether attached DTE equipment is actually asserting DTR, e.g. before troubleshooting DTR-triggered dialing.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.466.3.12.2 snmpwalk -v2c -c public <target> TY1250I-MIB::ty1250DiagDteSigDTR
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.466.3.12.2.1 snmpget -v2c -c public <target> TY1250I-MIB::ty1250DiagDteSigDTR.1
Start monitoring TY1250I series circuit/network device (hardware/software revision and module-inventory status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TY1250I-MIB::ty1250DiagDteSigDTR OID value, configure state conditions and alerts, and monitor any TY1250I series circuit/network device (hardware/software revision and module-inventory status) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.466 | tylink | TY1250I-MIB |
| 1.3.6.1.4.1.466.3 | ty1250 | TY1250I-MIB |
| 1.3.6.1.4.1.466.3.12 | ty1250DiagDteTable | TY1250I-MIB |
| 1.3.6.1.4.1.466.3.12.2 | ty1250DiagDteSigDTR | TY1250I-MIB |