All MIBs › TY1250I-MIB › ty1250CfgSlipMaxMTU
ty1250CfgSlipMaxMTU
Module: TY1250I-MIB
OID (symbolic): TY1250I-MIB::ty1250CfgSlipMaxMTU
OID (numeric): 1.3.6.1.4.1.466.3.8.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The Maximum Transmission Unit is the size of the largest IP packet supported. This value should be set to the lowest value supported by any equipment in the transmission path. A size of 1006 (including header) is suggested.
What is ty1250CfgSlipMaxMTU?
Sets the maximum IP packet size, in bytes (1-1024), carried over the SLIP link; the MIB suggests 1006 including header, matched to the lowest MTU supported anywhere in the transmission path. Setting it too high can cause packet loss on links with a smaller MTU.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.466.3.8.4 snmpwalk -v2c -c public <target> TY1250I-MIB::ty1250CfgSlipMaxMTU
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.466.3.8.4.1 snmpget -v2c -c public <target> TY1250I-MIB::ty1250CfgSlipMaxMTU.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.466.3.8.4.1 i <value>
Start monitoring TY1250I series circuit/network device (hardware/software revision and module-inventory status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TY1250I-MIB::ty1250CfgSlipMaxMTU OID value, configure state conditions and alerts, and monitor any TY1250I series circuit/network device (hardware/software revision and module-inventory status) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.466 | tylink | TY1250I-MIB |
| 1.3.6.1.4.1.466.3 | ty1250 | TY1250I-MIB |
| 1.3.6.1.4.1.466.3.8 | ty1250CfgSlipTable | TY1250I-MIB |
| 1.3.6.1.4.1.466.3.8.4 | ty1250CfgSlipMaxMTU | TY1250I-MIB |