All MIBs › TY1250I-MIB › ty1250CfgNetType
ty1250CfgNetType
Module: TY1250I-MIB
OID (symbolic): TY1250I-MIB::ty1250CfgNetType
OID (numeric): 1.3.6.1.4.1.466.3.3.11
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Indicates type of service purchased on the attached network line (DDS or SW56). Valid selections are dedicated (1) and switch56 (2).
What is ty1250CfgNetType?
Selects the type of network service provisioned on the line: dedicated (1, standard DDS) or switch56 (2, switched 56k). Admins set this to match what they actually purchased from the carrier, since it changes which switched-call features become relevant.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.466.3.3.11 snmpwalk -v2c -c public <target> TY1250I-MIB::ty1250CfgNetType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.466.3.3.11.1 snmpget -v2c -c public <target> TY1250I-MIB::ty1250CfgNetType.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.466.3.3.11.1 i <value>
Start monitoring TY1250I series circuit/network device (hardware/software revision and module-inventory status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TY1250I-MIB::ty1250CfgNetType OID value, configure state conditions and alerts, and monitor any TY1250I series circuit/network device (hardware/software revision and module-inventory status) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.466 | tylink | TY1250I-MIB |
| 1.3.6.1.4.1.466.3 | ty1250 | TY1250I-MIB |
| 1.3.6.1.4.1.466.3.3 | ty1250CfgNetTable | TY1250I-MIB |
| 1.3.6.1.4.1.466.3.3.11 | ty1250CfgNetType | TY1250I-MIB |