All MIBs › TY1250I-MIB › ty1250CfgMaintBaud
ty1250CfgMaintBaud
Module: TY1250I-MIB
OID (symbolic): TY1250I-MIB::ty1250CfgMaintBaud
OID (numeric): 1.3.6.1.4.1.466.3.6.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Baud rate for this Maintenance port. Values are baud-2400 (2), baud-9600 (4), baud-19200 (5).
What is ty1250CfgMaintBaud?
Sets the serial baud rate for the indexed maintenance port: baud-2400 (2), baud-9600 (4), or baud-19200 (5). Admins must match this to the terminal or modem connected to that port.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.466.3.6.1.3 snmpwalk -v2c -c public <target> TY1250I-MIB::ty1250CfgMaintBaud
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.466.3.6.1.3.1 snmpget -v2c -c public <target> TY1250I-MIB::ty1250CfgMaintBaud.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.466.3.6.1.3.1 i <value>
Start monitoring TY1250I series circuit/network device (hardware/software revision and module-inventory status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TY1250I-MIB::ty1250CfgMaintBaud OID value, configure state conditions and alerts, and monitor any TY1250I series circuit/network device (hardware/software revision and module-inventory status) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.466 | tylink | TY1250I-MIB |
| 1.3.6.1.4.1.466.3 | ty1250 | TY1250I-MIB |
| 1.3.6.1.4.1.466.3.6 | ty1250CfgMaintTable | TY1250I-MIB |
| 1.3.6.1.4.1.466.3.6.1 | ty1250CfgMaintEntry | TY1250I-MIB |
| 1.3.6.1.4.1.466.3.6.1.3 | ty1250CfgMaintBaud | TY1250I-MIB |