All MIBs › TY1250I-MIB › ty1250CfgDteTiming
ty1250CfgDteTiming
Module: TY1250I-MIB
OID (symbolic): TY1250I-MIB::ty1250CfgDteTiming
OID (numeric): 1.3.6.1.4.1.466.3.4.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The DTE channel Timing mode. Use loop2-timing (2) when in doubt.
What is ty1250CfgDteTiming?
Selects the DTE channel's timing mode: loop1-timing (1) or loop2-timing (2), with the MIB recommending loop2-timing when unsure. It affects how the DTE interface derives its clock relative to the network side.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.466.3.4.6 snmpwalk -v2c -c public <target> TY1250I-MIB::ty1250CfgDteTiming
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.466.3.4.6.1 snmpget -v2c -c public <target> TY1250I-MIB::ty1250CfgDteTiming.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.466.3.4.6.1 i <value>
Start monitoring TY1250I series circuit/network device (hardware/software revision and module-inventory status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TY1250I-MIB::ty1250CfgDteTiming OID value, configure state conditions and alerts, and monitor any TY1250I series circuit/network device (hardware/software revision and module-inventory status) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.466 | tylink | TY1250I-MIB |
| 1.3.6.1.4.1.466.3 | ty1250 | TY1250I-MIB |
| 1.3.6.1.4.1.466.3.4 | ty1250CfgDteTable | TY1250I-MIB |
| 1.3.6.1.4.1.466.3.4.6 | ty1250CfgDteTiming | TY1250I-MIB |