All MIBs › TY1250I-MIB › ty1250CfgDialRtsDisc
ty1250CfgDialRtsDisc
Module: TY1250I-MIB
OID (symbolic): TY1250I-MIB::ty1250CfgDialRtsDisc
OID (numeric): 1.3.6.1.4.1.466.3.5.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: In switched applications, Enables/Disables disconnecting on RTS signal transition. Valid values are enable-rts (1) and disable-rts (2).
What is ty1250CfgDialRtsDisc?
In switched applications, enables or disables disconnecting the call when the RTS signal transitions: enable-rts (1) or disable-rts (2). It lets connected DTE equipment hang up a call by dropping RTS.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.466.3.5.3 snmpwalk -v2c -c public <target> TY1250I-MIB::ty1250CfgDialRtsDisc
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.466.3.5.3.1 snmpget -v2c -c public <target> TY1250I-MIB::ty1250CfgDialRtsDisc.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.466.3.5.3.1 i <value>
Start monitoring TY1250I series circuit/network device (hardware/software revision and module-inventory status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TY1250I-MIB::ty1250CfgDialRtsDisc OID value, configure state conditions and alerts, and monitor any TY1250I series circuit/network device (hardware/software revision and module-inventory status) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.466 | tylink | TY1250I-MIB |
| 1.3.6.1.4.1.466.3 | ty1250 | TY1250I-MIB |
| 1.3.6.1.4.1.466.3.5 | ty1250CfgDialTable | TY1250I-MIB |
| 1.3.6.1.4.1.466.3.5.3 | ty1250CfgDialRtsDisc | TY1250I-MIB |