All MIBs › TY1250I-MIB › ty1250CfgDialDtr
ty1250CfgDialDtr
Module: TY1250I-MIB
OID (symbolic): TY1250I-MIB::ty1250CfgDialDtr
OID (numeric): 1.3.6.1.4.1.466.3.5.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: In switched applications, Enables/Disables dialing on DTR signal transition. Valid values enable-dtr (1) and disable-dtr (2).
What is ty1250CfgDialDtr?
In switched applications, enables or disables dialing triggered by a DTR signal transition from the connected DTE equipment: enable-dtr (1) or disable-dtr (2). It lets a terminal/router raise DTR to auto-dial the configured number.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.466.3.5.2 snmpwalk -v2c -c public <target> TY1250I-MIB::ty1250CfgDialDtr
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.466.3.5.2.1 snmpget -v2c -c public <target> TY1250I-MIB::ty1250CfgDialDtr.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.466.3.5.2.1 i <value>
Start monitoring TY1250I series circuit/network device (hardware/software revision and module-inventory status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TY1250I-MIB::ty1250CfgDialDtr OID value, configure state conditions and alerts, and monitor any TY1250I series circuit/network device (hardware/software revision and module-inventory status) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.466 | tylink | TY1250I-MIB |
| 1.3.6.1.4.1.466.3 | ty1250 | TY1250I-MIB |
| 1.3.6.1.4.1.466.3.5 | ty1250CfgDialTable | TY1250I-MIB |
| 1.3.6.1.4.1.466.3.5.2 | ty1250CfgDialDtr | TY1250I-MIB |