TRUNK-MIB :: swSnoopLogicSourcePort

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › TRUNK-MIB › swSnoopLogicSourcePort

swSnoopLogicSourcePort

Module: TRUNK-MIB

OID (symbolic): TRUNK-MIB::swSnoopLogicSourcePort

OID (numeric): 1.3.6.1.4.1.326.2.20.1.2.2.2.24.7.1.1.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This object indicates the number of port to be sniffed. The port number is the sequential (logical) number which is also applied to bridge MIB, etc. For instance, logical port 1~22 is mapped to module 1's 10/100Base-T TP ports, port 23~24 is mapped to module 2's 100FX/TX ports, port 25 indicates for module 3's Gigabit port, and so on.

What is swSnoopLogicSourcePort?

This object indicates the logical (sequential) port number to be sniffed, using the same numbering scheme applied across the bridge MIB, where for example logical ports 1 through 22 map to module 1's 10/100Base-T ports. Admins set it to choose which port's traffic gets mirrored to the snoop target port. Setting swSnoopLogicSourcePort to logical port 25 would mirror traffic from module 3's Gigabit port to the configured target.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.326.2.20.1.2.2.2.24.7.1.1.2
snmpwalk -v2c -c public <target> TRUNK-MIB::swSnoopLogicSourcePort

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.326.2.20.1.2.2.2.24.7.1.1.2.1
snmpget -v2c -c public <target> TRUNK-MIB::swSnoopLogicSourcePort.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.326.2.20.1.2.2.2.24.7.1.1.2.1 i <value>

Start monitoring Ethernet switch supporting link aggregation/trunking (trunk-member port/traffic status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TRUNK-MIB::swSnoopLogicSourcePort OID value, configure state conditions and alerts, and monitor any Ethernet switch supporting link aggregation/trunking (trunk-member port/traffic status) from a single console.

OID Breakdown

Upper-level ancestors (14 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.326foreCOMMON-GOLF-MIB
1.3.6.1.4.1.326.2systemsCOMMON-GOLF-MIB
1.3.6.1.4.1.326.2.20ethernetCOMMON-GOLF-MIB
1.3.6.1.4.1.326.2.20.1edgeCOMMON-GOLF-MIB
1.3.6.1.4.1.326.2.20.1.2golfCOMMON-GOLF-MIB
1.3.6.1.4.1.326.2.20.1.2.2golfcommonCOMMON-GOLF-MIB
1.3.6.1.4.1.326.2.20.1.2.2.2fore_mgmtCOMMON-GOLF-MIB
1.3.6.1.4.1.326.2.20.1.2.2.2.24es1000SeriesES1000-MIB
Numeric OIDNameModule
1.3.6.1.4.1.326.2.20.1.2.2.2.24.7swSnoopPackageTRUNK-MIB
1.3.6.1.4.1.326.2.20.1.2.2.2.24.7.1swSnoopCtrlTableTRUNK-MIB
1.3.6.1.4.1.326.2.20.1.2.2.2.24.7.1.1swSnoopCtrlEntryTRUNK-MIB
1.3.6.1.4.1.326.2.20.1.2.2.2.24.7.1.1.2swSnoopLogicSourcePortTRUNK-MIB