signalhigh

OID (symbolic): TRANZEO-MIB::signalhigh

OID (numeric): 1.3.6.1.4.1.24575.1.1.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This object represents the highest received signal strength on the current channel in dBm. A 0 means no wireless connection.

What is signalhigh?

This value reports the highest received wireless signal strength observed on the current channel, in dBm, with 0 meaning no wireless connection is present. Admins compare it against signallow to gauge how much the signal strength varies over the current measurement window. A high reading close to the average, with a much lower low reading, points to occasional but not sustained signal degradation.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.24575.1.1.3
snmpwalk -v2c -c public <target> TRANZEO-MIB::signalhigh

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.24575.1.1.3.1
snmpget -v2c -c public <target> TRANZEO-MIB::signalhigh.1

Start monitoring Tranzeo Wireless Technologies wireless bridge/access-point products (RSSI/noise-floor signal-quality status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TRANZEO-MIB::signalhigh OID value, configure state conditions and alerts, and monitor any Tranzeo Wireless Technologies wireless bridge/access-point products (RSSI/noise-floor signal-quality status) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB

Numeric OID	Name	Module
1.3.6.1.4.1.24575	tranzeo	TRANZEO-MIB
1.3.6.1.4.1.24575.1	signal	TRANZEO-MIB
1.3.6.1.4.1.24575.1.1	rssi	TRANZEO-MIB
1.3.6.1.4.1.24575.1.1.3	signalhigh	TRANZEO-MIB

TRANZEO-MIB :: signalhigh

signalhigh

Module

This MIB depends on