TRANZEO-MIB :: noisehigh

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › TRANZEO-MIB › noisehigh

noisehigh

Module: TRANZEO-MIB

OID (symbolic): TRANZEO-MIB::noisehigh

OID (numeric): 1.3.6.1.4.1.24575.1.2.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This object represents the highest noise on the current channel in dBm. A 0 means no wireless connection.

What is noisehigh?

This value reports the highest noise level observed on the current channel, in dBm, with 0 meaning no wireless connection is present. Admins check it to spot channels prone to intermittent interference spikes that a simple average noise figure might obscure. A noise-high value that spikes well above the noise average points to intermittent interference on that channel, worth investigating with a spectrum scan.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.24575.1.2.3
snmpwalk -v2c -c public <target> TRANZEO-MIB::noisehigh

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.24575.1.2.3.1
snmpget -v2c -c public <target> TRANZEO-MIB::noisehigh.1

Start monitoring Tranzeo Wireless Technologies wireless bridge/access-point products (RSSI/noise-floor signal-quality status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TRANZEO-MIB::noisehigh OID value, configure state conditions and alerts, and monitor any Tranzeo Wireless Technologies wireless bridge/access-point products (RSSI/noise-floor signal-quality status) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.24575tranzeoTRANZEO-MIB
1.3.6.1.4.1.24575.1signalTRANZEO-MIB
1.3.6.1.4.1.24575.1.2noiseTRANZEO-MIB
1.3.6.1.4.1.24575.1.2.3noisehighTRANZEO-MIB

Module

This MIB depends on