All MIBs › TRANSMODE1100 › trm76xxSpeedLimit
trm76xxSpeedLimit
Module: TRANSMODE1100
OID (symbolic): TRANSMODE1100::trm76xxSpeedLimit
OID (numeric): 1.3.6.1.4.1.11857.1.2.2.4.1.1.1.11
Node type: OBJECT-TYPE
Type: SpeedLimit76
Access: read-write
Description: This parameter indicates the speed limit set for this unit and is used to set a new speed limit. It generates an alarm and disables Line and Client Tx if the Client bitrate is higher than a predefined protocol. The alarm is ceased and Tx is enabled again at a lower value (hysteresis). Speed Limit is deactivated if trm76xxTxMode is disabled(2) or forcedon(3). Speed Limit can be set in 4 modes to allow different protocols: noLimit(1): Any protocol is allowed. lowLimit(2): 100Base-FX, STM1/OC3, ESCON & Video 270Mb. mediumLimit(3): All protocols above + STM4/OC-12. highLimit(4): All protocols above + Fibre channel & Gigabit Ethernet.
What is trm76xxSpeedLimit?
A read-write setting, from noLimit(1) up to highLimit(4) (which additionally allows Fibre Channel and Gigabit Ethernet rates), that caps which client bitrates are accepted before an alarm fires and transmit is disabled; the feature is bypassed when trm76xxTxMode is disabled(2) or forcedon(3). An admin selects the appropriate tier to match the fastest protocol this particular link is provisioned to carry, blocking accidental over-rate signals.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11857.1.2.2.4.1.1.1.11 snmpwalk -v2c -c public <target> TRANSMODE1100::trm76xxSpeedLimit
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11857.1.2.2.4.1.1.1.11.1 snmpget -v2c -c public <target> TRANSMODE1100::trm76xxSpeedLimit.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11857.1.2.2.4.1.1.1.11.1 s <value>
Start monitoring Transmode 1100 optical transport node (DWDM channel/optical-power status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TRANSMODE1100::trm76xxSpeedLimit OID value, configure state conditions and alerts, and monitor any Transmode 1100 optical transport node (DWDM channel/optical-power status) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11857 | transmode | TRANSMODE1100 |
| 1.3.6.1.4.1.11857.1 | system1100 | TRANSMODE1100 |
| 1.3.6.1.4.1.11857.1.2 | trmSubrack | TRANSMODE1100 |
| 1.3.6.1.4.1.11857.1.2.2 | trmSubrackUnits | TRANSMODE1100 |
| 1.3.6.1.4.1.11857.1.2.2.4 | trm76xx | TRANSMODE1100 |
| 1.3.6.1.4.1.11857.1.2.2.4.1 | trm76xxPM | TRANSMODE1100 |
| 1.3.6.1.4.1.11857.1.2.2.4.1.1 | trm76xxTable | TRANSMODE1100 |
| 1.3.6.1.4.1.11857.1.2.2.4.1.1.1 | trm76xxEntry | TRANSMODE1100 |
| 1.3.6.1.4.1.11857.1.2.2.4.1.1.1.11 | trm76xxSpeedLimit | TRANSMODE1100 |