TRANGOP5830S-MU-MIB :: muuniiTargetRSSI

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsTRANGOP5830S-MU-MIBmuuniiTargetRSSI

muuniiTargetRSSI

Module: TRANGOP5830S-MU-MIB

OID (symbolic): TRANGOP5830S-MU-MIB::muuniiTargetRSSI

OID (numeric): 1.3.6.1.4.1.5454.1.22.2.6.5

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This object is only applicable to M5830S/P5830S radio. UNII RF target RSSI (in dBm). It specifies the target RSSI from remote unit to the master unit. Based on this parameter, the master can power level the remote unit so that it receives same level of signal strength from the remote unit, regardless far or near. Note that when you set the Target RSSI from the remote unit, you need to consider remote unit's RF Rx Threshold value. The Target RSSI from the remote unit must be 5dB higher than the RF Rx Threshold.

What is muuniiTargetRSSI?

Sets the target received signal strength, in dBm, the master unit aims for when power-leveling the remote unit over the UNII band, applicable only to the M5830S/P5830S radio; it must be configured at least 5 dB higher than muuniiRxThreshold. An admin tunes this the same way as muismTargetRSSI, but for the UNII rather than ISM band.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5454.1.22.2.6.5
snmpwalk -v2c -c public <target> TRANGOP5830S-MU-MIB::muuniiTargetRSSI

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.5454.1.22.2.6.5.1
snmpget -v2c -c public <target> TRANGOP5830S-MU-MIB::muuniiTargetRSSI.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.5454.1.22.2.6.5.1 i <value>

Start monitoring Trango P5830S wireless master unit radio (subscriber-unit registration/link status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TRANGOP5830S-MU-MIB::muuniiTargetRSSI OID value, configure state conditions and alerts, and monitor any Trango P5830S wireless master unit radio (subscriber-unit registration/link status) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.5454trangoTRANGO-APEX-MIB
1.3.6.1.4.1.5454.1tbwTRANGO-APEX-MIB
Numeric OIDNameModule
1.3.6.1.4.1.5454.1.22p5830smuTRANGOP5830S-MU-MIB
1.3.6.1.4.1.5454.1.22.2murfTRANGOP5830S-MU-MIB
1.3.6.1.4.1.5454.1.22.2.6muuniiTRANGOP5830S-MU-MIB
1.3.6.1.4.1.5454.1.22.2.6.5muuniiTargetRSSITRANGOP5830S-MU-MIB