All MIBs › TPLINK-ETHERNETOAMBASICCFG-MIB › ethernetOamBasicCfgMode
ethernetOamBasicCfgMode
Module: TPLINK-ETHERNETOAMBASICCFG-MIB
OID (symbolic): TPLINK-ETHERNETOAMBASICCFG-MIB::ethernetOamBasicCfgMode
OID (numeric): 1.3.6.1.4.1.11863.6.60.1.1.1.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Select mode of Ethernet OAM client.
What is ethernetOamBasicCfgMode?
This value selects whether a port's Ethernet OAM (802.3ah) client operates in passive(0) or active(1) mode, per the source description; active mode initiates OAM discovery with the remote peer, while passive mode waits to be discovered. A network administrator sets one end of a link to active and typically leaves the other passive (or both active) to establish the OAM session used for link monitoring and remote troubleshooting on that last-mile connection. For example, setting ethernetOamBasicCfgMode to active(1) on an uplink port lets that switch initiate OAM discovery with the ISP's equipment on the other end.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11863.6.60.1.1.1.1.2 snmpwalk -v2c -c public <target> TPLINK-ETHERNETOAMBASICCFG-MIB::ethernetOamBasicCfgMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11863.6.60.1.1.1.1.2.1 snmpget -v2c -c public <target> TPLINK-ETHERNETOAMBASICCFG-MIB::ethernetOamBasicCfgMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11863.6.60.1.1.1.1.2.1 i <value>
Start monitoring TP-Link managed Ethernet switch (per-port OAM mode/PDU-rate config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TPLINK-ETHERNETOAMBASICCFG-MIB::ethernetOamBasicCfgMode OID value, configure state conditions and alerts, and monitor any TP-Link managed Ethernet switch (per-port OAM mode/PDU-rate config status) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11863 | tplink | TPLINK-MIB |
| 1.3.6.1.4.1.11863.6 | tplinkMgmt | TPLINK-MIB |
| 1.3.6.1.4.1.11863.6.60 | tplinkEthernetOam | TPLINK-ETHERNETOAM-MIB |
| 1.3.6.1.4.1.11863.6.60.1 | tplinkEthernetOamMIBObjects | TPLINK-ETHERNETOAM-MIB |
| 1.3.6.1.4.1.11863.6.60.1.1 | ethernetOamBasicConfig | TPLINK-ETHERNETOAM-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11863.6.60.1.1.1 | ethernetOamBasicCfgTable | TPLINK-ETHERNETOAMBASICCFG-MIB |
| 1.3.6.1.4.1.11863.6.60.1.1.1.1 | ethernetOamBasicCfgEntry | TPLINK-ETHERNETOAMBASICCFG-MIB |
| 1.3.6.1.4.1.11863.6.60.1.1.1.1.2 | ethernetOamBasicCfgMode | TPLINK-ETHERNETOAMBASICCFG-MIB |