TOKEN-RING-RMON-MIB :: ringStationFrequencyErrors

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › TOKEN-RING-RMON-MIB › ringStationFrequencyErrors

ringStationFrequencyErrors

Module: TOKEN-RING-RMON-MIB

OID (symbolic): TOKEN-RING-RMON-MIB::ringStationFrequencyErrors

OID (numeric): 1.3.6.1.2.1.16.10.2.1.18

Node type: OBJECT-TYPE

Type: Counter

Access: read-only

Description: The total number of frequency errors reported by this station in error reporting packets detected by the probe.

What is ringStationFrequencyErrors?

Counts frequency errors this station reported, indicating its clock oscillator is out of tolerance with the ring's signal timing.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.16.10.2.1.18
snmpwalk -v2c -c public <target> TOKEN-RING-RMON-MIB::ringStationFrequencyErrors

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.16.10.2.1.18.1
snmpget -v2c -c public <target> TOKEN-RING-RMON-MIB::ringStationFrequencyErrors.1

Start monitoring vendor-neutral, standards-based MIB, Token Ring switch/bridge/RMON probe, legacy (ring traffic/source-route statistics) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TOKEN-RING-RMON-MIB::ringStationFrequencyErrors OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB, Token Ring switch/bridge/RMON probe, legacy (ring traffic/source-route statistics) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAPERTUS-NPG-MIB
1.3.6.1.2.1mib_2AXON-MIB
1.3.6.1.2.1.16rmonITOUCHHUB
Numeric OIDNameModule
1.3.6.1.2.1.16.10tokenRingTOKEN-RING-RMON-MIB
1.3.6.1.2.1.16.10.2ringStationTableTOKEN-RING-RMON-MIB
1.3.6.1.2.1.16.10.2.1ringStationEntryTOKEN-RING-RMON-MIB
1.3.6.1.2.1.16.10.2.1.18ringStationFrequencyErrorsTOKEN-RING-RMON-MIB