TOKEN-RING-RMON-MIB :: ringStationConfigLocation

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › TOKEN-RING-RMON-MIB › ringStationConfigLocation

ringStationConfigLocation

Module: TOKEN-RING-RMON-MIB

OID (symbolic): TOKEN-RING-RMON-MIB::ringStationConfigLocation

OID (numeric): 1.3.6.1.2.1.16.10.5.1.4

Node type: OBJECT-TYPE

Type: OCTET STRING

Access: read-only

Description: The assigned physical location of this station.

What is ringStationConfigLocation?

A 4-byte field holding the physical location the station itself reports, which an admin can use (if the device populates it meaningfully) to help physically locate the hardware.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.16.10.5.1.4
snmpwalk -v2c -c public <target> TOKEN-RING-RMON-MIB::ringStationConfigLocation

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.16.10.5.1.4.1
snmpget -v2c -c public <target> TOKEN-RING-RMON-MIB::ringStationConfigLocation.1

Start monitoring vendor-neutral, standards-based MIB, Token Ring switch/bridge/RMON probe, legacy (ring traffic/source-route statistics) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TOKEN-RING-RMON-MIB::ringStationConfigLocation OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB, Token Ring switch/bridge/RMON probe, legacy (ring traffic/source-route statistics) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAPERTUS-NPG-MIB
1.3.6.1.2.1mib_2AXON-MIB
1.3.6.1.2.1.16rmonITOUCHHUB
Numeric OIDNameModule
1.3.6.1.2.1.16.10tokenRingTOKEN-RING-RMON-MIB
1.3.6.1.2.1.16.10.5ringStationConfigTableTOKEN-RING-RMON-MIB
1.3.6.1.2.1.16.10.5.1ringStationConfigEntryTOKEN-RING-RMON-MIB
1.3.6.1.2.1.16.10.5.1.4ringStationConfigLocationTOKEN-RING-RMON-MIB