All MIBs › TNPP-OPT-MIB › tnppPCfgCallControl
tnppPCfgCallControl
Module: TNPP-OPT-MIB
OID (symbolic): TNPP-OPT-MIB::tnppPCfgCallControl
OID (numeric): 1.3.6.1.4.1.449.2.1.2.1.1.32.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Specifies the mode for X.25 call generation. dtr - X.25 call is generated when DTR is up. Connection type between TNPP PAD and Paging Terminal is DTR. dataDrv - X.25 call is generated on incoming data. Connection type between TNPP PAD and Paging Terminal is SIMP. powerOn - X.25 call is generated on Node Boot/Power On. Connection type between TNPP PAD and Paging Terminal is SIMP. nc - Skipped during configuration.
What is tnppPCfgCallControl?
This read-only enumeration specifies how the X.25 call is triggered on this port: dtr (when DTR line goes up, for a DTR-connected PAD), dataDrv (on incoming data, for a SIMP-connected paging terminal), powerOn (on node boot, also SIMP), or nc if skipped during configuration. Checking this helps explain why a paging terminal's X.25 connection comes up when it does -- e.g. a dataDrv port won't call out until the terminal actually sends data.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.449.2.1.2.1.1.32.1.4 snmpwalk -v2c -c public <target> TNPP-OPT-MIB::tnppPCfgCallControl
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.449.2.1.2.1.1.32.1.4.1 snmpget -v2c -c public <target> TNPP-OPT-MIB::tnppPCfgCallControl.1
Start monitoring vendor/device type unclear, object naming suggests Cadant/Arris CMTS heritage (port-protocol conformance status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TNPP-OPT-MIB::tnppPCfgCallControl OID value, configure state conditions and alerts, and monitor any vendor/device type unclear, object naming suggests Cadant/Arris CMTS heritage (port-protocol conformance status) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.449 | codex | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2 | cdxProductSpecific | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1 | cdx6500 | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2 | cdx6500Configuration | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2.1 | cdx6500CfgProtocolGroup | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2.1.1 | cdx6500PCTPortProtocolGroup | ALC-OPT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.449.2.1.2.1.1.32 | cdx6500PPCTTNPPPortTable | TNPP-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2.1.1.32.1 | cdx6500PPCTTNPPPortEntry | TNPP-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2.1.1.32.1.4 | tnppPCfgCallControl | TNPP-OPT-MIB |