All MIBs › TN-MGMT-MIB › tnSysSelectiveLPT
tnSysSelectiveLPT
Module: TN-MGMT-MIB
OID (symbolic): TN-MGMT-MIB::tnSysSelectiveLPT
OID (numeric): 1.3.6.1.4.1.868.2.5.3.1.1.2.1.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Devices which support this feature allow write for enabling or disabling the feature. Some of the 2-port devices which are capable of remote management of a similiar device support this feature. This is typically supported by devices which support 'tnSysTransparentLPT'. Selective Link pass through when enabled monitors the link status of one port on device A, any change in its operational state is passed on to the device's other port to bring down its link and vice-versa. It is similiar to 'tnSysLinkPassThro' except it only works in one direction from Port 1 to Port 2 or Port 2 to Port 1 not both directions.
What is tnSysSelectiveLPT?
This read-write setting enables Selective Link Pass Through, a one-directional variant of Transparent Link Pass Through where a fault on one port propagates only from Port 1 to Port 2, or only from Port 2 to Port 1, but not both directions. Admins pick this over full transparent LPT when they specifically need one-way fault propagation between two paired devices.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.868.2.5.3.1.1.2.1.1.3 snmpwalk -v2c -c public <target> TN-MGMT-MIB::tnSysSelectiveLPT
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.868.2.5.3.1.1.2.1.1.3.1 snmpget -v2c -c public <target> TN-MGMT-MIB::tnSysSelectiveLPT.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.868.2.5.3.1.1.2.1.1.3.1 i <value>
Start monitoring Transition Networks media conversion/networking products, entire product line (device naming/uptime/reset status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TN-MGMT-MIB::tnSysSelectiveLPT OID value, configure state conditions and alerts, and monitor any Transition Networks media conversion/networking products, entire product line (device naming/uptime/reset status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.868 | transition | TRANSITION-SMI |
| 1.3.6.1.4.1.868.2 | products | TRANSITION-SMI |
| 1.3.6.1.4.1.868.2.5 | tnProducts | TRANSITION-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.868.2.5.3 | tnMgmtMIB | TN-MGMT-MIB |
| 1.3.6.1.4.1.868.2.5.3.1 | tnMgmtObjects | TN-MGMT-MIB |
| 1.3.6.1.4.1.868.2.5.3.1.1 | tnDevMgmt | TN-MGMT-MIB |
| 1.3.6.1.4.1.868.2.5.3.1.1.2 | tnDevSysLPT | TN-MGMT-MIB |
| 1.3.6.1.4.1.868.2.5.3.1.1.2.1 | tnDevSysLPTTable | TN-MGMT-MIB |
| 1.3.6.1.4.1.868.2.5.3.1.1.2.1.1 | tnDevSysLPTEntry | TN-MGMT-MIB |
| 1.3.6.1.4.1.868.2.5.3.1.1.2.1.1.3 | tnSysSelectiveLPT | TN-MGMT-MIB |