TN-MGMT-MIB :: tnSysLinkPassThro

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsTN-MGMT-MIBtnSysLinkPassThro

tnSysLinkPassThro

Module: TN-MGMT-MIB

OID (symbolic): TN-MGMT-MIB::tnSysLinkPassThro

OID (numeric): 1.3.6.1.4.1.868.2.5.3.1.1.2.1.1.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Devices which support this feature allow write for enabling or disabling the feature. Most 2-port devices support this feature. Link pass through when enabled monitors the link status of one port, any change in its operational state is passed on to the other port and vice-versa. For eg: If Port 1 becomes operationally down, the Port 2 is brought down. When Port 1 becomes operational again, Port 2 is also brought up.

What is tnSysLinkPassThro?

This read-write setting enables or disables Link Pass Through on a 2-port device: when enabled, if one port goes operationally down, the other port is automatically brought down too (and vice versa when it recovers). It's commonly used so that a fault on one side of a media converter is visible to equipment on the other side rather than being silently absorbed.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.868.2.5.3.1.1.2.1.1.1
snmpwalk -v2c -c public <target> TN-MGMT-MIB::tnSysLinkPassThro

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.868.2.5.3.1.1.2.1.1.1.1
snmpget -v2c -c public <target> TN-MGMT-MIB::tnSysLinkPassThro.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.868.2.5.3.1.1.2.1.1.1.1 i <value>

Start monitoring Transition Networks media conversion/networking products, entire product line (device naming/uptime/reset status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TN-MGMT-MIB::tnSysLinkPassThro OID value, configure state conditions and alerts, and monitor any Transition Networks media conversion/networking products, entire product line (device naming/uptime/reset status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.868transitionTRANSITION-SMI
1.3.6.1.4.1.868.2productsTRANSITION-SMI
1.3.6.1.4.1.868.2.5tnProductsTRANSITION-SMI
Numeric OIDNameModule
1.3.6.1.4.1.868.2.5.3tnMgmtMIBTN-MGMT-MIB
1.3.6.1.4.1.868.2.5.3.1tnMgmtObjectsTN-MGMT-MIB
1.3.6.1.4.1.868.2.5.3.1.1tnDevMgmtTN-MGMT-MIB
1.3.6.1.4.1.868.2.5.3.1.1.2tnDevSysLPTTN-MGMT-MIB
1.3.6.1.4.1.868.2.5.3.1.1.2.1tnDevSysLPTTableTN-MGMT-MIB
1.3.6.1.4.1.868.2.5.3.1.1.2.1.1tnDevSysLPTEntryTN-MGMT-MIB
1.3.6.1.4.1.868.2.5.3.1.1.2.1.1.1tnSysLinkPassThroTN-MGMT-MIB