All MIBs › TN-ETH-RING-MIB › tnEthRingRevertTime
tnEthRingRevertTime
Module: TN-ETH-RING-MIB
OID (symbolic): TN-ETH-RING-MIB::tnEthRingRevertTime
OID (numeric): 1.3.6.1.4.1.7483.6.1.2.72.1.1.1.8
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-create
Description: The value of tnEthRingRevertTime specifies the Wait-To-Restore (WTR) timer, in seconds, of a Ring-APS (R-APS) node.
The WTR timer is used to prevent frequent operation of the protection switching due to intermittent signal failure defects.
Setting tnEthRingRevertTime to the value zero (0) puts the Ethernet Ring into a non-revertive mode.
What is tnEthRingRevertTime?
The Wait-To-Restore timer, in seconds (0-720, default 300), that this Ring-APS node waits before reverting after a failure clears, preventing protection switching from flapping on an intermittent signal fault; setting it to 0 puts the ring into non-revertive mode.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.7483 | tropic | TROPIC-GLOBAL-REG |
| 1.3.6.1.4.1.7483.6 | tnProducts | TROPIC-GLOBAL-REG |
| 1.3.6.1.4.1.7483.6.1 | tnSRMIB | TROPIC-GLOBAL-REG |
| 1.3.6.1.4.1.7483.6.1.2 | tnSRObjs | TROPIC-GLOBAL-REG |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.7483.6.1.2.72 | tnEthRingObjs | TN-ETH-RING-MIB |
| 1.3.6.1.4.1.7483.6.1.2.72.1 | tnEthRingConfigurations | TN-ETH-RING-MIB |
| 1.3.6.1.4.1.7483.6.1.2.72.1.1 | tnEthRingConfigTable | TN-ETH-RING-MIB |
| 1.3.6.1.4.1.7483.6.1.2.72.1.1.1 | tnEthRingConfigEntry | TN-ETH-RING-MIB |
| 1.3.6.1.4.1.7483.6.1.2.72.1.1.1.8 | tnEthRingRevertTime | TN-ETH-RING-MIB |