All MIBs › TN-DEV-SYS-UPGRADER-MIB › upgradeOpCommand
upgradeOpCommand
Module: TN-DEV-SYS-UPGRADER-MIB
OID (symbolic): TN-DEV-SYS-UPGRADER-MIB::upgradeOpCommand
OID (numeric): 1.3.6.1.4.1.868.2.5.3.1.1.30.1.1.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: none perform nothing.
upgrade perform the required upgrade operation. This operation is valid only if upgradeOpStatus object returns value 'none'.
done This operation is valid only if upgradeOpStatus object returns value 'none'. upgrade manager would do the required cleanup of previous upgrade operation and make the system ready for any new upgrade operation. This is needed because the system maintains the status of the previous upgrade operation for a maximum time before it does the cleanup. During this period no new upgrade operation is allowed.
What is upgradeOpCommand?
The command to control this ION module's upgrade: none(1) does nothing, upgrade(2) starts the upgrade (only valid when upgradeOpStatus reads none), and done(3) tells the manager to clean up a finished upgrade so a new one can begin (also only valid when status reads none).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.868.2.5.3.1.1.30.1.1.1.1 snmpwalk -v2c -c public <target> TN-DEV-SYS-UPGRADER-MIB::upgradeOpCommand
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.868.2.5.3.1.1.30.1.1.1.1.1 snmpget -v2c -c public <target> TN-DEV-SYS-UPGRADER-MIB::upgradeOpCommand.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.868.2.5.3.1.1.30.1.1.1.1.1 i <value>
Start monitoring Transition Networks ION-series managed switch (firmware upgrade operation/result status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TN-DEV-SYS-UPGRADER-MIB::upgradeOpCommand OID value, configure state conditions and alerts, and monitor any Transition Networks ION-series managed switch (firmware upgrade operation/result status) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.868 | transition | TRANSITION-SMI |
| 1.3.6.1.4.1.868.2 | products | TRANSITION-SMI |
| 1.3.6.1.4.1.868.2.5 | tnProducts | TRANSITION-SMI |
| 1.3.6.1.4.1.868.2.5.3 | tnMgmtMIB | TN-MGMT-MIB |
| 1.3.6.1.4.1.868.2.5.3.1 | tnMgmtObjects | TN-MGMT-MIB |
| 1.3.6.1.4.1.868.2.5.3.1.1 | tnDevMgmt | TN-MGMT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.868.2.5.3.1.1.30 | tnDevSysUpgraderMIB | TN-DEV-SYS-UPGRADER-MIB |
| 1.3.6.1.4.1.868.2.5.3.1.1.30.1 | tnDevSysUpgrader | TN-DEV-SYS-UPGRADER-MIB |
| 1.3.6.1.4.1.868.2.5.3.1.1.30.1.1 | tnUpgradeOpTable | TN-DEV-SYS-UPGRADER-MIB |
| 1.3.6.1.4.1.868.2.5.3.1.1.30.1.1.1 | tnUpgradeOpEntry | TN-DEV-SYS-UPGRADER-MIB |
| 1.3.6.1.4.1.868.2.5.3.1.1.30.1.1.1.1 | upgradeOpCommand | TN-DEV-SYS-UPGRADER-MIB |