All MIBs › TMU-MIB › fibTmuLoadEeDefaults
fibTmuLoadEeDefaults
Module: TMU-MIB
OID (symbolic): TMU-MIB::fibTmuLoadEeDefaults
OID (numeric): 1.3.6.1.4.1.22.60.1.18
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: When this object is set, the Tmu system is instructed to load non volatile memory by default values at the next reset. Get: Read the value the system will use on the next reset. Set: If 'load-defults' is written then at the next system reset, non volatile ram will be loaded by default values and the object will automatically be loaded by 'dont-load-defaults'. Note that, among other things, Tmu will lose, in this case, its IP address.
What is fibTmuLoadEeDefaults?
Setting this object instructs the Tmu to reload non-volatile memory with factory default values at the next reset; after setting 'load-defaults', the object automatically reverts to 'dont-load-defaults' once armed. Reading it shows what the system will do on the next reset. Admins use this as a factory-reset mechanism, but should be aware it wipes the configured IP address too -- for example, using this to recover a Tmu with corrupted configuration means the admin must be ready to re-address the device afterward.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.22.60.1.18 snmpwalk -v2c -c public <target> TMU-MIB::fibTmuLoadEeDefaults
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.22.60.1.18.1 snmpget -v2c -c public <target> TMU-MIB::fibTmuLoadEeDefaults.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.22.60.1.18.1 i <value>
Start monitoring Legacy networking equipment, enterprise OID 22 fibronics (firmware inventory/fault-handling status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TMU-MIB::fibTmuLoadEeDefaults OID value, configure state conditions and alerts, and monitor any Legacy networking equipment, enterprise OID 22 fibronics (firmware inventory/fault-handling status) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.22 | spartacus | CMU-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.22.60 | tmu | TMU-MIB |
| 1.3.6.1.4.1.22.60.1 | tmuSystem | TMU-MIB |
| 1.3.6.1.4.1.22.60.1.18 | fibTmuLoadEeDefaults | TMU-MIB |