All MIBs › TMU-MIB › fibTmuFunctUseJitterPerm
fibTmuFunctUseJitterPerm
Module: TMU-MIB
OID (symbolic): TMU-MIB::fibTmuFunctUseJitterPerm
OID (numeric): 1.3.6.1.4.1.22.60.8.2.18
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Indication on whether to use the jitter buster hardware module or not. Values: 1 - FALSE, 2 - TRUE. Factory default: TRUE. Setting this variable loads it into non volatile memory. The value written into non volatile memory is loaded into the current value only after reset.
What is fibTmuFunctUseJitterPerm?
This sets, in non-volatile memory, whether to use the jitter-buster hardware module. Valid range is a boolean (FALSE/TRUE); factory default is TRUE. Setting this object stores the new value for the next reset, but does not change the currently-effective fibTmuFunctUseJitterRun value until the system is actually reset. Admins leave this enabled unless the jitter-buster module needs to be bypassed for a specific hardware troubleshooting reason, then schedule a reset to apply the change.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.22.60.8.2.18 snmpwalk -v2c -c public <target> TMU-MIB::fibTmuFunctUseJitterPerm
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.22.60.8.2.18.1 snmpget -v2c -c public <target> TMU-MIB::fibTmuFunctUseJitterPerm.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.22.60.8.2.18.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> fibTmuFunctUseJitterPerm.1
Start monitoring Legacy networking equipment, enterprise OID 22 fibronics (firmware inventory/fault-handling status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TMU-MIB::fibTmuFunctUseJitterPerm OID value, configure state conditions and alerts, and monitor any Legacy networking equipment, enterprise OID 22 fibronics (firmware inventory/fault-handling status) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.22 | spartacus | CMU-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.22.60 | tmu | TMU-MIB |
| 1.3.6.1.4.1.22.60.8 | tmuFunction | TMU-MIB |
| 1.3.6.1.4.1.22.60.8.2 | fibTmuFunctRtpGrpVrsPerm | TMU-MIB |
| 1.3.6.1.4.1.22.60.8.2.18 | fibTmuFunctUseJitterPerm | TMU-MIB |