TMU-MIB :: fibTmuFunctTmsOnOutRun

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › TMU-MIB › fibTmuFunctTmsOnOutRun

fibTmuFunctTmsOnOutRun

Module: TMU-MIB

OID (symbolic): TMU-MIB::fibTmuFunctTmsOnOutRun

OID (numeric): 1.3.6.1.4.1.22.60.8.1.17

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: Parameter indicating the tms to leave out of the ring when carrying out 'warp out': It could be TMS no. 2 (TMS OUT) or the TMS which is on the secondary ring. values: (TMS OUT) 1, (TMS SECONDARY) 2 Factory default: (TMS OUT) 1 To change this object, load 'fibTmuFunctTmsOnOutPerm' into non-volatile ram. The value written into non volatile memory is loaded into the current value only after reset.

What is fibTmuFunctTmsOnOutRun?

This is the run-time (currently effective) value of which TMS (interface chipset) to leave out of the ring when carrying out a 'warp out': TMS OUT (value 1) or the TMS on the secondary ring (value 2). Valid range is 1 to 2; factory default is 1 (TMS OUT). This is a read-only snapshot of what's actually in effect right now -- to change it, an admin must set fibTmuFunctTmsOnOutPerm and then reset the system, since the new value only takes effect in this Run object after a reset. Admins set this according to which chipset should be excluded from the ring during a warp-out operation on this hardware configuration.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.22.60.8.1.17
snmpwalk -v2c -c public <target> TMU-MIB::fibTmuFunctTmsOnOutRun

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.22.60.8.1.17.1
snmpget -v2c -c public <target> TMU-MIB::fibTmuFunctTmsOnOutRun.1

Start monitoring Legacy networking equipment, enterprise OID 22 fibronics (firmware inventory/fault-handling status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TMU-MIB::fibTmuFunctTmsOnOutRun OID value, configure state conditions and alerts, and monitor any Legacy networking equipment, enterprise OID 22 fibronics (firmware inventory/fault-handling status) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.22spartacusCMU-MIB
Numeric OIDNameModule
1.3.6.1.4.1.22.60tmuTMU-MIB
1.3.6.1.4.1.22.60.8tmuFunctionTMU-MIB
1.3.6.1.4.1.22.60.8.1fibTmuFunctRtpGrpVrsRunTMU-MIB
1.3.6.1.4.1.22.60.8.1.17fibTmuFunctTmsOnOutRunTMU-MIB