All MIBs › TMU-MIB › fibTmuFunctTmsOnOutPerm
fibTmuFunctTmsOnOutPerm
Module: TMU-MIB
OID (symbolic): TMU-MIB::fibTmuFunctTmsOnOutPerm
OID (numeric): 1.3.6.1.4.1.22.60.8.2.17
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Parameter indicating the tms to leave out of the ring when carrying out 'warp out': It could be TMS no. 2 (TMS OUT) or the TMS which is on the secondary ring. values: (TMS OUT) 1, (TMS SECONDARY) 2 Factory default: (TMS OUT) 1 Setting this variable loads it into non volatile memory. The value written into non volatile memory is loaded into the current value only after reset.
What is fibTmuFunctTmsOnOutPerm?
This sets, in non-volatile memory, which TMS (interface chipset) to leave out of the ring when carrying out a 'warp out': TMS OUT (value 1) or the TMS on the secondary ring (value 2). Valid range is 1 to 2; factory default is 1 (TMS OUT). Setting this object stores the new value for the next reset, but does not change the currently-effective fibTmuFunctTmsOnOutRun value until the system is actually reset. Admins set this according to which chipset should be excluded from the ring during a warp-out operation on this hardware configuration, then schedule a reset to apply the change.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.22.60.8.2.17 snmpwalk -v2c -c public <target> TMU-MIB::fibTmuFunctTmsOnOutPerm
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.22.60.8.2.17.1 snmpget -v2c -c public <target> TMU-MIB::fibTmuFunctTmsOnOutPerm.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.22.60.8.2.17.1 i <value>
Start monitoring Legacy networking equipment, enterprise OID 22 fibronics (firmware inventory/fault-handling status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TMU-MIB::fibTmuFunctTmsOnOutPerm OID value, configure state conditions and alerts, and monitor any Legacy networking equipment, enterprise OID 22 fibronics (firmware inventory/fault-handling status) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.22 | spartacus | CMU-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.22.60 | tmu | TMU-MIB |
| 1.3.6.1.4.1.22.60.8 | tmuFunction | TMU-MIB |
| 1.3.6.1.4.1.22.60.8.2 | fibTmuFunctRtpGrpVrsPerm | TMU-MIB |
| 1.3.6.1.4.1.22.60.8.2.17 | fibTmuFunctTmsOnOutPerm | TMU-MIB |