TMU-MIB :: fibTmuFunctRingIstPerm

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › TMU-MIB › fibTmuFunctRingIstPerm

fibTmuFunctRingIstPerm

Module: TMU-MIB

OID (symbolic): TMU-MIB::fibTmuFunctRingIstPerm

OID (numeric): 1.3.6.1.4.1.22.60.8.2.6

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Time to poll for consistent Tmu ring status before continuing recovery. In units of milliseconds. Minimal value: 0. maximal value 200. Factory default: 0 Setting this variable loads it into non volatile memory. The value written into non volatile memory is loaded into the current value only after reset.

What is fibTmuFunctRingIstPerm?

This sets, in non-volatile memory, the time to poll for a consistent Tmu ring status before continuing with recovery. Valid range is 0 to 200 (milliseconds); factory default is 0. Setting this object stores the new value for the next reset, but does not change the currently-effective fibTmuFunctRingIstRun value until the system is actually reset. Admins tune this to control how long the recovery process waits for ring status to stabilize before proceeding, then schedule a reset to apply the change.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.22.60.8.2.6
snmpwalk -v2c -c public <target> TMU-MIB::fibTmuFunctRingIstPerm

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.22.60.8.2.6.1
snmpget -v2c -c public <target> TMU-MIB::fibTmuFunctRingIstPerm.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.22.60.8.2.6.1 i <value>

Start monitoring Legacy networking equipment, enterprise OID 22 fibronics (firmware inventory/fault-handling status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TMU-MIB::fibTmuFunctRingIstPerm OID value, configure state conditions and alerts, and monitor any Legacy networking equipment, enterprise OID 22 fibronics (firmware inventory/fault-handling status) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.22spartacusCMU-MIB
Numeric OIDNameModule
1.3.6.1.4.1.22.60tmuTMU-MIB
1.3.6.1.4.1.22.60.8tmuFunctionTMU-MIB
1.3.6.1.4.1.22.60.8.2fibTmuFunctRtpGrpVrsPermTMU-MIB
1.3.6.1.4.1.22.60.8.2.6fibTmuFunctRingIstPermTMU-MIB