All MIBs › TMU-MIB › fibTmuFunctReadPerRun
fibTmuFunctReadPerRun
Module: TMU-MIB
OID (symbolic): TMU-MIB::fibTmuFunctReadPerRun
OID (numeric): 1.3.6.1.4.1.22.60.8.1.24
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Parameter indicating the elapsed time between two readings of the error counter of a TMS. Too large a period may result in counter overflow. A value of '0' indicates 'read every TR driver poll' Units: milli seconds. Minimal value: 0. maximal value 5000. Factory default: 5000. To change this object, load 'fibTmuFunctReadPerPerm' into non-volatile ram. The value written into non volatile memory is loaded into the current value only after reset.
What is fibTmuFunctReadPerRun?
This is the run-time (currently effective) value of the elapsed time between two readings of a TMS's error counter (too long a period risks the counter overflowing; a value of 0 means read on every token ring driver poll). Valid range is 0 to 5000 (milliseconds); factory default is 5000. This is a read-only snapshot of what's actually in effect right now -- to change it, an admin must set fibTmuFunctReadPerPerm and then reset the system, since the new value only takes effect in this Run object after a reset. Admins shorten this if error counters are at risk of overflowing between reads on a very busy or noisy ring.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.22.60.8.1.24 snmpwalk -v2c -c public <target> TMU-MIB::fibTmuFunctReadPerRun
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.22.60.8.1.24.1 snmpget -v2c -c public <target> TMU-MIB::fibTmuFunctReadPerRun.1
Start monitoring Legacy networking equipment, enterprise OID 22 fibronics (firmware inventory/fault-handling status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TMU-MIB::fibTmuFunctReadPerRun OID value, configure state conditions and alerts, and monitor any Legacy networking equipment, enterprise OID 22 fibronics (firmware inventory/fault-handling status) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.22 | spartacus | CMU-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.22.60 | tmu | TMU-MIB |
| 1.3.6.1.4.1.22.60.8 | tmuFunction | TMU-MIB |
| 1.3.6.1.4.1.22.60.8.1 | fibTmuFunctRtpGrpVrsRun | TMU-MIB |
| 1.3.6.1.4.1.22.60.8.1.24 | fibTmuFunctReadPerRun | TMU-MIB |