TMU-MIB :: fibTmuFunctOk2BeaconPerm

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › TMU-MIB › fibTmuFunctOk2BeaconPerm

fibTmuFunctOk2BeaconPerm

Module: TMU-MIB

OID (symbolic): TMU-MIB::fibTmuFunctOk2BeaconPerm

OID (numeric): 1.3.6.1.4.1.22.60.8.2.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The upper bound for time period starting at the insertion of a problem till ring status indicates beaconing. In units of milliseconds. Minimal value: 1100. maximal value 2500. Factory default: 2000. Setting this variable loads it into non volatile memory. The value written into non volatile memory is loaded into the current value only after reset.

What is fibTmuFunctOk2BeaconPerm?

This sets, in non-volatile memory, the upper bound on the time period from the insertion of a problem until ring status indicates beaconing. Valid range is 1100 to 2500 (milliseconds); factory default is 2000. Setting this object stores the new value for the next reset, but does not change the currently-effective fibTmuFunctOk2BeaconRun value until the system is actually reset. Admins tune this to control how long the system allows before it expects a newly-inserted fault to manifest as beaconing, then schedule a reset to apply the change.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.22.60.8.2.3
snmpwalk -v2c -c public <target> TMU-MIB::fibTmuFunctOk2BeaconPerm

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.22.60.8.2.3.1
snmpget -v2c -c public <target> TMU-MIB::fibTmuFunctOk2BeaconPerm.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.22.60.8.2.3.1 i <value>

Start monitoring Legacy networking equipment, enterprise OID 22 fibronics (firmware inventory/fault-handling status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TMU-MIB::fibTmuFunctOk2BeaconPerm OID value, configure state conditions and alerts, and monitor any Legacy networking equipment, enterprise OID 22 fibronics (firmware inventory/fault-handling status) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.22spartacusCMU-MIB
Numeric OIDNameModule
1.3.6.1.4.1.22.60tmuTMU-MIB
1.3.6.1.4.1.22.60.8tmuFunctionTMU-MIB
1.3.6.1.4.1.22.60.8.2fibTmuFunctRtpGrpVrsPermTMU-MIB
1.3.6.1.4.1.22.60.8.2.3fibTmuFunctOk2BeaconPermTMU-MIB