All MIBs › TMU-MIB › fibTmuFunctMaxNoiRun
fibTmuFunctMaxNoiRun
Module: TMU-MIB
OID (symbolic): TMU-MIB::fibTmuFunctMaxNoiRun
OID (numeric): 1.3.6.1.4.1.22.60.8.1.9
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: When several station wants to insert into the ring, this parameter sets the limit on the maximal number of stations which are allowed to insert (other stations are delayed until the next round). If 0 then enable all stations are allowed to insert. Minimal value: 0. maximal value 300. Factory default: 1 To change this object, load 'fibTmuFunctRingIstPerm' into non-volatile ram. The value written into non volatile memory is loaded into the current value only after reset.
What is fibTmuFunctMaxNoiRun?
This is the run-time (currently effective) value of the limit on how many stations are allowed to insert into the ring at once when several want to insert simultaneously (a value of 0 allows all of them; others are delayed to the next round). Valid range is 0 to 300; factory default is 1. This is a read-only snapshot of what's actually in effect right now -- to change it, an admin must set fibTmuFunctMaxNoiPerm and then reset the system, since the new value only takes effect in this Run object after a reset. Admins raise this to let more stations join the ring simultaneously during a mass power-up, at the risk of more insertion contention.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.22.60.8.1.9 snmpwalk -v2c -c public <target> TMU-MIB::fibTmuFunctMaxNoiRun
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.22.60.8.1.9.1 snmpget -v2c -c public <target> TMU-MIB::fibTmuFunctMaxNoiRun.1
Start monitoring Legacy networking equipment, enterprise OID 22 fibronics (firmware inventory/fault-handling status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TMU-MIB::fibTmuFunctMaxNoiRun OID value, configure state conditions and alerts, and monitor any Legacy networking equipment, enterprise OID 22 fibronics (firmware inventory/fault-handling status) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.22 | spartacus | CMU-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.22.60 | tmu | TMU-MIB |
| 1.3.6.1.4.1.22.60.8 | tmuFunction | TMU-MIB |
| 1.3.6.1.4.1.22.60.8.1 | fibTmuFunctRtpGrpVrsRun | TMU-MIB |
| 1.3.6.1.4.1.22.60.8.1.9 | fibTmuFunctMaxNoiRun | TMU-MIB |