TMU-MIB :: fibTmuFunctInsPatRun

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › TMU-MIB › fibTmuFunctInsPatRun

fibTmuFunctInsPatRun

Module: TMU-MIB

OID (symbolic): TMU-MIB::fibTmuFunctInsPatRun

OID (numeric): 1.3.6.1.4.1.22.60.8.1.11

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: Parameter for controlling the aging of the 'inseretion-pool' (Should be long enough to make sure that the station is not malfunctioning). Units: milli seconds. Minimal value: 1500. maximal value 4000. Factory default: 3000 To change this object, load 'fibTmuFunctInsPatPerm' into non-volatile ram. The value written into non volatile memory is loaded into the current value only after reset.

What is fibTmuFunctInsPatRun?

This is the run-time (currently effective) value of the aging parameter for the 'insertion pool', long enough to confirm an inserting station isn't malfunctioning before it's considered stable. Valid range is 1500 to 4000 (milliseconds); factory default is 3000. This is a read-only snapshot of what's actually in effect right now -- to change it, an admin must set fibTmuFunctInsPatPerm and then reset the system, since the new value only takes effect in this Run object after a reset. Admins tune this to balance how quickly a newly-inserted station is trusted against the risk of trusting a station that's about to misbehave.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.22.60.8.1.11
snmpwalk -v2c -c public <target> TMU-MIB::fibTmuFunctInsPatRun

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.22.60.8.1.11.1
snmpget -v2c -c public <target> TMU-MIB::fibTmuFunctInsPatRun.1

Start monitoring Legacy networking equipment, enterprise OID 22 fibronics (firmware inventory/fault-handling status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TMU-MIB::fibTmuFunctInsPatRun OID value, configure state conditions and alerts, and monitor any Legacy networking equipment, enterprise OID 22 fibronics (firmware inventory/fault-handling status) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.22spartacusCMU-MIB
Numeric OIDNameModule
1.3.6.1.4.1.22.60tmuTMU-MIB
1.3.6.1.4.1.22.60.8tmuFunctionTMU-MIB
1.3.6.1.4.1.22.60.8.1fibTmuFunctRtpGrpVrsRunTMU-MIB
1.3.6.1.4.1.22.60.8.1.11fibTmuFunctInsPatRunTMU-MIB