All MIBs › TMU-MIB › fibTmuFunctForceStpRoRun
fibTmuFunctForceStpRoRun
Module: TMU-MIB
OID (symbolic): TMU-MIB::fibTmuFunctForceStpRoRun
OID (numeric): 1.3.6.1.4.1.22.60.8.1.22
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This object is used to control the type of the trunk (OPTIC or STP). Algorithm: if (optic-module-exists && do-not-force-ro-stp) { ro-trunk-type = OPTIC ; } else { /* * This is the case of: NO-OPTIC-MODULE or * FORCING-THE-TRUNK-TO-STP */ ro-trunk-type = STP ; } Factory default: FALSE (1). To change this object, load 'fibTmuFunctForceStpRoPerm' into non-volatile ram. The value written into non volatile memory is loaded into the current value only after reset.
What is fibTmuFunctForceStpRoRun?
This is the run-time (currently effective) value of whether the ring-out trunk type is forced to STP (shielded twisted pair) rather than being auto-detected as OPTIC when an optic module is present. Valid range is a boolean (FALSE/TRUE); factory default is FALSE. This is a read-only snapshot of what's actually in effect right now -- to change it, an admin must set fibTmuFunctForceStpRoPerm and then reset the system, since the new value only takes effect in this Run object after a reset. Admins enable this to force STP wiring on ring-out even if an optic module is installed, mirroring ForceStpRi for the outgoing side.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.22.60.8.1.22 snmpwalk -v2c -c public <target> TMU-MIB::fibTmuFunctForceStpRoRun
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.22.60.8.1.22.1 snmpget -v2c -c public <target> TMU-MIB::fibTmuFunctForceStpRoRun.1
Start monitoring Legacy networking equipment, enterprise OID 22 fibronics (firmware inventory/fault-handling status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TMU-MIB::fibTmuFunctForceStpRoRun OID value, configure state conditions and alerts, and monitor any Legacy networking equipment, enterprise OID 22 fibronics (firmware inventory/fault-handling status) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.22 | spartacus | CMU-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.22.60 | tmu | TMU-MIB |
| 1.3.6.1.4.1.22.60.8 | tmuFunction | TMU-MIB |
| 1.3.6.1.4.1.22.60.8.1 | fibTmuFunctRtpGrpVrsRun | TMU-MIB |
| 1.3.6.1.4.1.22.60.8.1.22 | fibTmuFunctForceStpRoRun | TMU-MIB |