All MIBs › TMU-MIB › fibTmuFunctForceStpRoPerm
fibTmuFunctForceStpRoPerm
Module: TMU-MIB
OID (symbolic): TMU-MIB::fibTmuFunctForceStpRoPerm
OID (numeric): 1.3.6.1.4.1.22.60.8.2.22
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object is used to control the type of the trunk (OPTIC or STP). Algorithm: if (optic-module-exists && do-not-force-ro-stp) { ro-trunk-type = OPTIC ; } else { /* * This is the case of: NO-OPTIC-MODULE or * FORCING-THE-TRUNK-TO-STP */ ro-trunk-type = STP ; } Factory default: FALSE (1). Setting this variable loads it into non volatile memory. The value written into non volatile memory is loaded into the current value only after reset.
What is fibTmuFunctForceStpRoPerm?
This sets, in non-volatile memory, whether the ring-out trunk type is forced to STP (shielded twisted pair) rather than being auto-detected as OPTIC when an optic module is present. Valid range is a boolean (FALSE/TRUE); factory default is FALSE. Setting this object stores the new value for the next reset, but does not change the currently-effective fibTmuFunctForceStpRoRun value until the system is actually reset. Admins enable this to force STP wiring on ring-out even if an optic module is installed, mirroring ForceStpRi for the outgoing side, then schedule a reset to apply the change.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.22.60.8.2.22 snmpwalk -v2c -c public <target> TMU-MIB::fibTmuFunctForceStpRoPerm
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.22.60.8.2.22.1 snmpget -v2c -c public <target> TMU-MIB::fibTmuFunctForceStpRoPerm.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.22.60.8.2.22.1 i <value>
Start monitoring Legacy networking equipment, enterprise OID 22 fibronics (firmware inventory/fault-handling status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TMU-MIB::fibTmuFunctForceStpRoPerm OID value, configure state conditions and alerts, and monitor any Legacy networking equipment, enterprise OID 22 fibronics (firmware inventory/fault-handling status) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.22 | spartacus | CMU-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.22.60 | tmu | TMU-MIB |
| 1.3.6.1.4.1.22.60.8 | tmuFunction | TMU-MIB |
| 1.3.6.1.4.1.22.60.8.2 | fibTmuFunctRtpGrpVrsPerm | TMU-MIB |
| 1.3.6.1.4.1.22.60.8.2.22 | fibTmuFunctForceStpRoPerm | TMU-MIB |