All MIBs › TMU-MIB › fibTmuFunctDmaThreshRun
fibTmuFunctDmaThreshRun
Module: TMU-MIB
OID (symbolic): TMU-MIB::fibTmuFunctDmaThreshRun
OID (numeric): 1.3.6.1.4.1.22.60.8.1.25
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Parameter indicating the number of times DMA will attempt retry in case of bus error before giving up. Minimal value: 0. maximal value 30. Factory default: 30. To change this object, load 'fibTmuFunctDmaThreshPerm' into non-volatile ram. The value written into non volatile memory is loaded into the current value only after reset.
What is fibTmuFunctDmaThreshRun?
This is the run-time (currently effective) value of the number of times a DMA transfer will retry after a bus error before giving up. Valid range is 0 to 30; factory default is 30. This is a read-only snapshot of what's actually in effect right now -- to change it, an admin must set fibTmuFunctDmaThreshPerm and then reset the system, since the new value only takes effect in this Run object after a reset. Admins lower this to fail DMA operations faster on a system with a suspected hardware bus problem, or raise it for extra tolerance of transient bus glitches.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.22.60.8.1.25 snmpwalk -v2c -c public <target> TMU-MIB::fibTmuFunctDmaThreshRun
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.22.60.8.1.25.1 snmpget -v2c -c public <target> TMU-MIB::fibTmuFunctDmaThreshRun.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> fibTmuFunctDmaThreshRun.1
Start monitoring Legacy networking equipment, enterprise OID 22 fibronics (firmware inventory/fault-handling status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TMU-MIB::fibTmuFunctDmaThreshRun OID value, configure state conditions and alerts, and monitor any Legacy networking equipment, enterprise OID 22 fibronics (firmware inventory/fault-handling status) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.22 | spartacus | CMU-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.22.60 | tmu | TMU-MIB |
| 1.3.6.1.4.1.22.60.8 | tmuFunction | TMU-MIB |
| 1.3.6.1.4.1.22.60.8.1 | fibTmuFunctRtpGrpVrsRun | TMU-MIB |
| 1.3.6.1.4.1.22.60.8.1.25 | fibTmuFunctDmaThreshRun | TMU-MIB |