All MIBs › TMU-MIB › fibTmuFunctClaimTimeOutPerm
fibTmuFunctClaimTimeOutPerm
Module: TMU-MIB
OID (symbolic): TMU-MIB::fibTmuFunctClaimTimeOutPerm
OID (numeric): 1.3.6.1.4.1.22.60.8.2.15
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Parameter indicating the elapsed time between the detection of a problem and the beginning of sending 'claim'. Units: milli seconds. Minimal value: 150. maximal value 500. Factory default: 250 Setting this variable loads it into non volatile memory. The value written into non volatile memory is loaded into the current value only after reset.
What is fibTmuFunctClaimTimeOutPerm?
This sets, in non-volatile memory, the elapsed time between detecting a problem and the system beginning to send the token ring 'claim' process. Valid range is 150 to 500 (milliseconds); factory default is 250. Setting this object stores the new value for the next reset, but does not change the currently-effective fibTmuFunctClaimTimeOutRun value until the system is actually reset. Admins tune this to control how quickly the ring moves into token-claiming recovery after a problem is first detected, then schedule a reset to apply the change.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.22.60.8.2.15 snmpwalk -v2c -c public <target> TMU-MIB::fibTmuFunctClaimTimeOutPerm
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.22.60.8.2.15.1 snmpget -v2c -c public <target> TMU-MIB::fibTmuFunctClaimTimeOutPerm.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.22.60.8.2.15.1 i <value>
Start monitoring Legacy networking equipment, enterprise OID 22 fibronics (firmware inventory/fault-handling status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TMU-MIB::fibTmuFunctClaimTimeOutPerm OID value, configure state conditions and alerts, and monitor any Legacy networking equipment, enterprise OID 22 fibronics (firmware inventory/fault-handling status) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.22 | spartacus | CMU-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.22.60 | tmu | TMU-MIB |
| 1.3.6.1.4.1.22.60.8 | tmuFunction | TMU-MIB |
| 1.3.6.1.4.1.22.60.8.2 | fibTmuFunctRtpGrpVrsPerm | TMU-MIB |
| 1.3.6.1.4.1.22.60.8.2.15 | fibTmuFunctClaimTimeOutPerm | TMU-MIB |