All MIBs › TMU-MIB › fibTmuFunctChkRingInsPerm
fibTmuFunctChkRingInsPerm
Module: TMU-MIB
OID (symbolic): TMU-MIB::fibTmuFunctChkRingInsPerm
OID (numeric): 1.3.6.1.4.1.22.60.8.2.13
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Indication on whether to check ring status (for possible problems caused by the currently inserted stations) or not. Setting 'TRUE' results in quicker discovery of stations with invalid frequency but inflicts higher overhead on legitimate frequency stations. Values: 1 - FALSE, 2 - TRUE. Factory default: FALSE. Setting this variable loads it into non volatile memory. The value written into non volatile memory is loaded into the current value only after reset.
What is fibTmuFunctChkRingInsPerm?
This sets, in non-volatile memory, whether to check ring status for possible problems caused by currently-inserted stations (TRUE gives quicker discovery of stations with an invalid frequency, at the cost of extra overhead on legitimate ones). Valid range is a boolean (FALSE/TRUE); factory default is FALSE. Setting this object stores the new value for the next reset, but does not change the currently-effective fibTmuFunctChkRingInsRun value until the system is actually reset. Admins enable this if faster detection of frequency-mismatched stations is worth the added overhead on a busy ring, then schedule a reset to apply the change.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.22.60.8.2.13 snmpwalk -v2c -c public <target> TMU-MIB::fibTmuFunctChkRingInsPerm
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.22.60.8.2.13.1 snmpget -v2c -c public <target> TMU-MIB::fibTmuFunctChkRingInsPerm.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.22.60.8.2.13.1 i <value>
Start monitoring Legacy networking equipment, enterprise OID 22 fibronics (firmware inventory/fault-handling status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TMU-MIB::fibTmuFunctChkRingInsPerm OID value, configure state conditions and alerts, and monitor any Legacy networking equipment, enterprise OID 22 fibronics (firmware inventory/fault-handling status) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.22 | spartacus | CMU-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.22.60 | tmu | TMU-MIB |
| 1.3.6.1.4.1.22.60.8 | tmuFunction | TMU-MIB |
| 1.3.6.1.4.1.22.60.8.2 | fibTmuFunctRtpGrpVrsPerm | TMU-MIB |
| 1.3.6.1.4.1.22.60.8.2.13 | fibTmuFunctChkRingInsPerm | TMU-MIB |