All MIBs › TMU-MIB › fibTmuFunctBeacon2OkPerm
fibTmuFunctBeacon2OkPerm
Module: TMU-MIB
OID (symbolic): TMU-MIB::fibTmuFunctBeacon2OkPerm
OID (numeric): 1.3.6.1.4.1.22.60.8.2.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The upper bound for time period starting at the removal of a problem till ring status indicates no beaconing. In units of milliseconds. Minimal value: 40. maximal value 200. Factory default: 50. Setting this variable loads it into non volatile memory. The value written into non volatile memory is loaded into the current value only after reset.
What is fibTmuFunctBeacon2OkPerm?
This sets, in non-volatile memory, the upper bound on the time period from the removal of a problem until ring status indicates no more beaconing. Valid range is 40 to 200 (milliseconds); factory default is 50. Setting this object stores the new value for the next reset, but does not change the currently-effective fibTmuFunctBeacon2OkRun value until the system is actually reset. Admins tune this to control how long the system waits to confirm a fault has genuinely cleared before declaring the ring healthy again, then schedule a reset to apply the change.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.22.60.8.2.2 snmpwalk -v2c -c public <target> TMU-MIB::fibTmuFunctBeacon2OkPerm
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.22.60.8.2.2.1 snmpget -v2c -c public <target> TMU-MIB::fibTmuFunctBeacon2OkPerm.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.22.60.8.2.2.1 i <value>
Start monitoring Legacy networking equipment, enterprise OID 22 fibronics (firmware inventory/fault-handling status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TMU-MIB::fibTmuFunctBeacon2OkPerm OID value, configure state conditions and alerts, and monitor any Legacy networking equipment, enterprise OID 22 fibronics (firmware inventory/fault-handling status) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.22 | spartacus | CMU-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.22.60 | tmu | TMU-MIB |
| 1.3.6.1.4.1.22.60.8 | tmuFunction | TMU-MIB |
| 1.3.6.1.4.1.22.60.8.2 | fibTmuFunctRtpGrpVrsPerm | TMU-MIB |
| 1.3.6.1.4.1.22.60.8.2.2 | fibTmuFunctBeacon2OkPerm | TMU-MIB |