All MIBs › TMU-MIB › fibTmuFunctBeacon2AutotestPerm
fibTmuFunctBeacon2AutotestPerm
Module: TMU-MIB
OID (symbolic): TMU-MIB::fibTmuFunctBeacon2AutotestPerm
OID (numeric): 1.3.6.1.4.1.22.60.8.2.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The time period for starting the 'autoremove' test after start of beaconing. In units of milliseconds. Minimal value: 160. maximal value 200. Factory default: 160. Setting this variable loads it into non volatile memory. The value written into non volatile memory is loaded into the current value only after reset.
What is fibTmuFunctBeacon2AutotestPerm?
This sets, in non-volatile memory, the time period for starting the 'autoremove' test after the start of beaconing. Valid range is 160 to 200 (milliseconds); factory default is 160. Setting this object stores the new value for the next reset, but does not change the currently-effective fibTmuFunctBeacon2AutotestRun value until the system is actually reset. Admins tune this to control how quickly the device begins its automatic fault-isolation test once beaconing (a hard ring fault) is detected, then schedule a reset to apply the change.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.22.60.8.2.1 snmpwalk -v2c -c public <target> TMU-MIB::fibTmuFunctBeacon2AutotestPerm
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.22.60.8.2.1.1 snmpget -v2c -c public <target> TMU-MIB::fibTmuFunctBeacon2AutotestPerm.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.22.60.8.2.1.1 i <value>
Start monitoring Legacy networking equipment, enterprise OID 22 fibronics (firmware inventory/fault-handling status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TMU-MIB::fibTmuFunctBeacon2AutotestPerm OID value, configure state conditions and alerts, and monitor any Legacy networking equipment, enterprise OID 22 fibronics (firmware inventory/fault-handling status) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.22 | spartacus | CMU-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.22.60 | tmu | TMU-MIB |
| 1.3.6.1.4.1.22.60.8 | tmuFunction | TMU-MIB |
| 1.3.6.1.4.1.22.60.8.2 | fibTmuFunctRtpGrpVrsPerm | TMU-MIB |
| 1.3.6.1.4.1.22.60.8.2.1 | fibTmuFunctBeacon2AutotestPerm | TMU-MIB |