All MIBs › TIGER › tigRestartReason
tigRestartReason
Module: TIGER
OID (symbolic): TIGER::tigRestartReason
OID (numeric): 1.3.6.1.4.1.1978.2.1.2.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Informs the NMS why the Tiger most recently restarted:
power - due to a power failure reset-button - someone pushed the reset button watchdog - the internal watchdog timer forced a reset config-fail - there was a catastrophic failure in the configuration file causing a system reset. ('tigConfigFile' informs you which config file is currently being used) other - someother unknown reason. (these should never occur) double-bus-fault - a invalid address was being reference while the exception handler for a bus-fault exception (an invalid address was referenced) was being executed. fatal-exception - a fatal software exception occured inside Tiger reboot-command - a user issued a 'reboot' command on a console
What is tigRestartReason?
This read-only enumeration reports why the Tiger most recently restarted, covering causes such as power(1) loss, someone pressing the reset-button(2), a watchdog(3) timeout, a config-fail(4) in the boot configuration, a double-bus-fault(6), a fatal-exception(7) in the software, or an operator-issued reboot-command(8). Admins check it after an unexpected reboot to distinguish a hardware issue from a software crash or a bad configuration file. It is also carried as a variable in the tigRestart trap, alongside the time of the restart from tigSystemDate.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1978.2.1.2.7 snmpwalk -v2c -c public <target> TIGER::tigRestartReason
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1978.2.1.2.7.1 snmpget -v2c -c public <target> TIGER::tigRestartReason.1
Start monitoring Northrop Grumman-Canada, Ltd. Tiger system equipment (interface-stack/hardware configuration status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TIGER::tigRestartReason OID value, configure state conditions and alerts, and monitor any Northrop Grumman-Canada, Ltd. Tiger system equipment (interface-stack/hardware configuration status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1978 | ngcan | ALC-MIB |
| 1.3.6.1.4.1.1978.2 | tiger | ALC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1978.2.1 | generalTiger | TIGER |
| 1.3.6.1.4.1.1978.2.1.2 | tsystem | TIGER |
| 1.3.6.1.4.1.1978.2.1.2.7 | tigRestartReason | TIGER |