All MIBs › TIGER › autifDestAddrType
autifDestAddrType
Module: TIGER
OID (symbolic): TIGER::autifDestAddrType
OID (numeric): 1.3.6.1.4.1.1978.2.1.5.2.1.25
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object controls whether or not the destination address is present in the outgoing data stream from a Type A user to the IP interface logic. It is only applicable for UDP type services (see autifService).
To handle alternate access operation, the Destination address can be inserted by the alternate access module (see altaHostSupplementalAddr).
'none' - no additional address information is present, and the message is sent to the sockets default destination IP address.
'ip' - this indicates that the first 4 bytes of the data stream holds the IP address of the destination host. For a UDP style socket this address is used in the applications sendto() call. If the address is all zeros, then the message will be sent to the sockets default destination IP address defined in autifRemAddress. On messages sourced from the IP layer, the source IP address is pre-pended to the data stream before it is forwarded to the alternate access module and multiplexor.
What is autifDestAddrType?
This setting controls whether a destination IP address is expected to be embedded in the outgoing data stream from a Type A user, applicable only to UDP-style AUTIF services. With none(1), no address is embedded and traffic goes to the socket's default destination (autifRemAddress); with ip(2), the first 4 bytes of the stream carry the destination address to use, falling back to autifRemAddress if that address is all zeros. Admins use the ip(2) setting when a single UDP socket needs to reach different destinations per message rather than always the same peer.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1978.2.1.5.2.1.25 snmpwalk -v2c -c public <target> TIGER::autifDestAddrType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1978.2.1.5.2.1.25.1 snmpget -v2c -c public <target> TIGER::autifDestAddrType.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1978.2.1.5.2.1.25.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> autifDestAddrType.1
Start monitoring Northrop Grumman-Canada, Ltd. Tiger system equipment (interface-stack/hardware configuration status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TIGER::autifDestAddrType OID value, configure state conditions and alerts, and monitor any Northrop Grumman-Canada, Ltd. Tiger system equipment (interface-stack/hardware configuration status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1978 | ngcan | ALC-MIB |
| 1.3.6.1.4.1.1978.2 | tiger | ALC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1978.2.1 | generalTiger | TIGER |
| 1.3.6.1.4.1.1978.2.1.5 | autif | TIGER |
| 1.3.6.1.4.1.1978.2.1.5.2 | autifTable | TIGER |
| 1.3.6.1.4.1.1978.2.1.5.2.1 | autifEntry | TIGER |
| 1.3.6.1.4.1.1978.2.1.5.2.1.25 | autifDestAddrType | TIGER |