All MIBs › TIGER › apathUserApathOperation
apathUserApathOperation
Module: TIGER
OID (symbolic): TIGER::apathUserApathOperation
OID (numeric): 1.3.6.1.4.1.1978.2.1.6.4.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: default = mainPrefered This defines the switching characteristics of main and alternate paths. MAIN PREFERED Re-connect to the main path only. - continuous retry of main path. - disconnect the alternate path in use and switch to the main path when it is known to be UP. - When the main path fails, then attempt to re-establish the path on one of the alternate paths in the order Alternate 1, then Alternate 2, then Alternate 3.
SWITCH TO BEST PATH Connect to the best path. - continuous retry of the main path and any path that is higher than the path currently in use. - disconnect the path ans select the highest priority path that is known to be UP. - when a the current path fails, then attempt to re-establish the path based on the priority order of: main, alternate 1, 2, 3. AVOID SWITCHING No automatic switching occurs. - remain connected with the current path as long as it remains UP. - when it fails, or is commanded to disconnect, then re-establish path based on the priority order of: main, alternate 1, 2, 3.
What is apathUserApathOperation?
This setting controls how a user switches between its main and alternate Apath connections: mainPrefered(1) always tries to return to the main path when it's known to be up, switchToBestPath(2) continuously seeks out the highest-priority path currently available, and avoidSwitching(3) stays on whatever path is currently connected until it fails. Admins pick mainPrefered when the main path should always be favored once available, or avoidSwitching to minimize path flapping. It defaults to mainPrefered.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1978.2.1.6.4.1.2 snmpwalk -v2c -c public <target> TIGER::apathUserApathOperation
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1978.2.1.6.4.1.2.1 snmpget -v2c -c public <target> TIGER::apathUserApathOperation.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1978.2.1.6.4.1.2.1 i <value>
Start monitoring Northrop Grumman-Canada, Ltd. Tiger system equipment (interface-stack/hardware configuration status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TIGER::apathUserApathOperation OID value, configure state conditions and alerts, and monitor any Northrop Grumman-Canada, Ltd. Tiger system equipment (interface-stack/hardware configuration status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1978 | ngcan | ALC-MIB |
| 1.3.6.1.4.1.1978.2 | tiger | ALC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1978.2.1 | generalTiger | TIGER |
| 1.3.6.1.4.1.1978.2.1.6 | apath | TIGER |
| 1.3.6.1.4.1.1978.2.1.6.4 | apathUserTable | TIGER |
| 1.3.6.1.4.1.1978.2.1.6.4.1 | apathUserEntry | TIGER |
| 1.3.6.1.4.1.1978.2.1.6.4.1.2 | apathUserApathOperation | TIGER |