All MIBs › TIARA-NETWORKS-SYSTEM-MIB › tiaraHoldDownTime
tiaraHoldDownTime
Module: TIARA-NETWORKS-SYSTEM-MIB
OID (symbolic): TIARA-NETWORKS-SYSTEM-MIB::tiaraHoldDownTime
OID (numeric): 1.3.6.1.4.1.3174.2.1.6.1.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The time, in seconds, that an Ethernet interface should be in holdDown when it receives an up signal. In other words, no source forwarding traffic should be sent on the Ethernet interface during the holdDown time period. The default is 3 seconds and the maximum is 900 seconds (15 minutes). This applies when failover is enabled on the interface and traffic has switched over to the other Ethernet interface .
What is tiaraHoldDownTime?
Time in seconds (3-900, default 3) that an Ethernet interface stays in holddown (no source-forwarded traffic sent) after it comes back up, applicable only when failover is enabled and traffic had switched to the other interface. Raise this if the link tends to flap right after recovery and you want to avoid flip-flopping traffic back too soon.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3174.2.1.6.1.1.3 snmpwalk -v2c -c public <target> TIARA-NETWORKS-SYSTEM-MIB::tiaraHoldDownTime
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3174.2.1.6.1.1.3.1 snmpget -v2c -c public <target> TIARA-NETWORKS-SYSTEM-MIB::tiaraHoldDownTime.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3174.2.1.6.1.1.3.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> tiaraHoldDownTime.1
Start monitoring Tiara Networks WAN router/access equipment (system alarm/Ethernet-failover/VLAN traffic status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TIARA-NETWORKS-SYSTEM-MIB::tiaraHoldDownTime OID value, configure state conditions and alerts, and monitor any Tiara Networks WAN router/access equipment (system alarm/Ethernet-failover/VLAN traffic status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3174 | tiaraNetworks | TIARA-NETWORKS-SMI |
| 1.3.6.1.4.1.3174.2 | tiaraMgmt | TIARA-NETWORKS-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3174.2.1 | tiaraSystemMib | TIARA-NETWORKS-SYSTEM-MIB |
| 1.3.6.1.4.1.3174.2.1.6 | ethernetFailOverGroup | TIARA-NETWORKS-SYSTEM-MIB |
| 1.3.6.1.4.1.3174.2.1.6.1 | tiaraEthernetFailOverTable | TIARA-NETWORKS-SYSTEM-MIB |
| 1.3.6.1.4.1.3174.2.1.6.1.1 | tiaraEthernetFailOverEntry | TIARA-NETWORKS-SYSTEM-MIB |
| 1.3.6.1.4.1.3174.2.1.6.1.1.3 | tiaraHoldDownTime | TIARA-NETWORKS-SYSTEM-MIB |