All MIBs › TIARA-NETWORKS-SYSTEM-MIB › tiaraFailOverEnable
tiaraFailOverEnable
Module: TIARA-NETWORKS-SYSTEM-MIB
OID (symbolic): TIARA-NETWORKS-SYSTEM-MIB::tiaraFailOverEnable
OID (numeric): 1.3.6.1.4.1.3174.2.1.6.1.1.2
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: This object toggles the failover enable mode for a particular Ethernet interface. The default mode is failover disabled. At present this is only applicable for data using source forwarding on an Ethernet interface. If failover is enabled on a particular Ethernet interface and the Ethernet interface link goes down, source forwarded traffic will switch over to the other Ethernet interface.
What is tiaraFailOverEnable?
Per-Ethernet-interface toggle (default disabled) enabling failover for source-forwarded traffic: if the interface's link goes down while this is enabled, source-forwarded traffic switches over to the other Ethernet interface. Enable this on redundant WAN-facing Ethernet ports where you want automatic traffic failover on link loss.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3174.2.1.6.1.1.2 snmpwalk -v2c -c public <target> TIARA-NETWORKS-SYSTEM-MIB::tiaraFailOverEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3174.2.1.6.1.1.2.1 snmpget -v2c -c public <target> TIARA-NETWORKS-SYSTEM-MIB::tiaraFailOverEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3174.2.1.6.1.1.2.1 s <value>
Start monitoring Tiara Networks WAN router/access equipment (system alarm/Ethernet-failover/VLAN traffic status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TIARA-NETWORKS-SYSTEM-MIB::tiaraFailOverEnable OID value, configure state conditions and alerts, and monitor any Tiara Networks WAN router/access equipment (system alarm/Ethernet-failover/VLAN traffic status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3174 | tiaraNetworks | TIARA-NETWORKS-SMI |
| 1.3.6.1.4.1.3174.2 | tiaraMgmt | TIARA-NETWORKS-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3174.2.1 | tiaraSystemMib | TIARA-NETWORKS-SYSTEM-MIB |
| 1.3.6.1.4.1.3174.2.1.6 | ethernetFailOverGroup | TIARA-NETWORKS-SYSTEM-MIB |
| 1.3.6.1.4.1.3174.2.1.6.1 | tiaraEthernetFailOverTable | TIARA-NETWORKS-SYSTEM-MIB |
| 1.3.6.1.4.1.3174.2.1.6.1.1 | tiaraEthernetFailOverEntry | TIARA-NETWORKS-SYSTEM-MIB |
| 1.3.6.1.4.1.3174.2.1.6.1.1.2 | tiaraFailOverEnable | TIARA-NETWORKS-SYSTEM-MIB |