All MIBs › TIARA-HSSI-MIB › hssiStatsAlarmStatus
hssiStatsAlarmStatus
Module: TIARA-HSSI-MIB
OID (symbolic): TIARA-HSSI-MIB::hssiStatsAlarmStatus
OID (numeric): 1.3.6.1.4.1.3174.2.7.2.3.1.1
Node type: OBJECT-TYPE
Type: Bits
Access: read-only
Description: Specifies the status of the HSSI alarm. If the particular bit is set, then it indicates that the alarm is in ON state. Alarm bits are mode dependent; they are interpreted as follows:
hssi-alarms-CA - CA not received from DCE (HSSI is DTE) hssi-alarms-ST - HSSI adaptor driving ST (HSSI is DCE) hssi-alarms-TM - TM received from DCE (HSSI is DTE) hssi-alarms-LC - HSSI adaptor detects LC (HSSI is DTE) hssi-alarms-LC - HSSI adaptor driving LC (HSSI is DCE) hssi-alarms-TA - TA not received from DTE (HSSI is DCE) hssi-alarms-LALB - HSSI adaptor detects LA and/or LB (HSSI is DCE) hssi-alarms-LALB - HSSI adaptor driving LA and/or LB (HSSI is DTE)
What is hssiStatsAlarmStatus?
This read-only BITS value reports which HSSI alarm conditions are currently active, with bit positions such as hssi-alarms-CA, hssi-alarms-ST, hssi-alarms-TM, hssi-alarms-LC, hssi-alarms-TA, and hssi-alarms-LALB; a set bit means that alarm is ON, and the meaning of each bit depends on whether the interface is acting as DTE or DCE. It gives an admin a quick way to see hardware-level signaling problems on the HSSI link without parsing individual trap events. For example, if the interface is in DTE mode and the DCE stops asserting CA, the hssi-alarms-CA bit would be set in hssiStatsAlarmStatus.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3174.2.7.2.3.1.1 snmpwalk -v2c -c public <target> TIARA-HSSI-MIB::hssiStatsAlarmStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3174.2.7.2.3.1.1.1 snmpget -v2c -c public <target> TIARA-HSSI-MIB::hssiStatsAlarmStatus.1
Start monitoring Tiara Networks WAN router, HSSI serial interface module (clocking/loopback status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TIARA-HSSI-MIB::hssiStatsAlarmStatus OID value, configure state conditions and alerts, and monitor any Tiara Networks WAN router, HSSI serial interface module (clocking/loopback status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3174 | tiaraNetworks | TIARA-NETWORKS-SMI |
| 1.3.6.1.4.1.3174.2 | tiaraMgmt | TIARA-NETWORKS-SMI |
| 1.3.6.1.4.1.3174.2.7 | tiaraInterfaces | TIARA-NETWORKS-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3174.2.7.2 | tiaraHssiMib | TIARA-HSSI-MIB |
| 1.3.6.1.4.1.3174.2.7.2.3 | hssiStatsTable | TIARA-HSSI-MIB |
| 1.3.6.1.4.1.3174.2.7.2.3.1 | hssiStatsTableEntry | TIARA-HSSI-MIB |
| 1.3.6.1.4.1.3174.2.7.2.3.1.1 | hssiStatsAlarmStatus | TIARA-HSSI-MIB |