All MIBs › TIARA-HSSI-MIB › hssiDteLoopback
hssiDteLoopback
Module: TIARA-HSSI-MIB
OID (symbolic): TIARA-HSSI-MIB::hssiDteLoopback
OID (numeric): 1.3.6.1.4.1.3174.2.7.2.1.1.10
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: Configures the local DTE for loopback operation:
TRUE : request local DTE to go into line loopback FALSE : request local DTE to abandon line loopback
These commands are valid only if the HSSI adaptor is in DCE mode and connected to a local DTE. Since the local DTE has a greater loopback priority than the local DCE, a loopback request initiated by the DCE will be ignored if the DTE simultaneously requests the DCE to loopback. Similarly, the DTE will abort a loopback already initiated by the DCE when the DTE requests the DCE to loopback.
What is hssiDteLoopback?
This read-write TruthValue requests the locally attached DTE to enter (true) or exit (false) line loopback, and is only meaningful when the local HSSI adapter is in DCE mode connected to that DTE. Because the DTE has higher loopback priority than the DCE, a DCE-initiated loopback is ignored if the DTE simultaneously requests one, and the DTE can abort a DCE-initiated loopback by requesting its own. An admin testing the local DTE's line interface would set hssiDteLoopback to true, verify the loop, then set it back to false to release it.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3174.2.7.2.1.1.10 snmpwalk -v2c -c public <target> TIARA-HSSI-MIB::hssiDteLoopback
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3174.2.7.2.1.1.10.1 snmpget -v2c -c public <target> TIARA-HSSI-MIB::hssiDteLoopback.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3174.2.7.2.1.1.10.1 s <value>
Start monitoring Tiara Networks WAN router, HSSI serial interface module (clocking/loopback status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TIARA-HSSI-MIB::hssiDteLoopback OID value, configure state conditions and alerts, and monitor any Tiara Networks WAN router, HSSI serial interface module (clocking/loopback status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3174 | tiaraNetworks | TIARA-NETWORKS-SMI |
| 1.3.6.1.4.1.3174.2 | tiaraMgmt | TIARA-NETWORKS-SMI |
| 1.3.6.1.4.1.3174.2.7 | tiaraInterfaces | TIARA-NETWORKS-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3174.2.7.2 | tiaraHssiMib | TIARA-HSSI-MIB |
| 1.3.6.1.4.1.3174.2.7.2.1 | hssiConfigTable | TIARA-HSSI-MIB |
| 1.3.6.1.4.1.3174.2.7.2.1.1 | hssiConfigTableEntry | TIARA-HSSI-MIB |
| 1.3.6.1.4.1.3174.2.7.2.1.1.10 | hssiDteLoopback | TIARA-HSSI-MIB |