All MIBs › TIARA-HSSI-MIB › hssiDceLoopbackTest
hssiDceLoopbackTest
Module: TIARA-HSSI-MIB
OID (symbolic): TIARA-HSSI-MIB::hssiDceLoopbackTest
OID (numeric): 1.3.6.1.4.1.3174.2.7.2.1.1.11
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Configures the local/remote DCE for loopback operation. Three DCE loopback modes are available: line, cable, and remote. Use noTest to abandon any of the DCE loopbacks. If the DCE is already in any one of the loopback modes, then noTest must be issued to abort the current test before initiating another loopback request. These commands are valid only if the HSSI adaptor is in DTE mode and it connected to a DCE.
What is hssiDceLoopbackTest?
This read-write enumeration — noTest(1), line(2), cable(3), or remote(4) — configures which loopback test the DCE performs, applicable only when the local HSSI adapter is in DTE mode connected to a DCE; noTest must be issued before switching from one active loopback mode to another. An admin isolating a suspected cable fault would set hssiDceLoopbackTest to cable(3) to loop the signal back at the cable connector, then set it to noTest(1) once done to restore normal operation.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3174.2.7.2.1.1.11 snmpwalk -v2c -c public <target> TIARA-HSSI-MIB::hssiDceLoopbackTest
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3174.2.7.2.1.1.11.1 snmpget -v2c -c public <target> TIARA-HSSI-MIB::hssiDceLoopbackTest.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3174.2.7.2.1.1.11.1 i <value>
Start monitoring Tiara Networks WAN router, HSSI serial interface module (clocking/loopback status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TIARA-HSSI-MIB::hssiDceLoopbackTest OID value, configure state conditions and alerts, and monitor any Tiara Networks WAN router, HSSI serial interface module (clocking/loopback status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3174 | tiaraNetworks | TIARA-NETWORKS-SMI |
| 1.3.6.1.4.1.3174.2 | tiaraMgmt | TIARA-NETWORKS-SMI |
| 1.3.6.1.4.1.3174.2.7 | tiaraInterfaces | TIARA-NETWORKS-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3174.2.7.2 | tiaraHssiMib | TIARA-HSSI-MIB |
| 1.3.6.1.4.1.3174.2.7.2.1 | hssiConfigTable | TIARA-HSSI-MIB |
| 1.3.6.1.4.1.3174.2.7.2.1.1 | hssiConfigTableEntry | TIARA-HSSI-MIB |
| 1.3.6.1.4.1.3174.2.7.2.1.1.11 | hssiDceLoopbackTest | TIARA-HSSI-MIB |