All MIBs › TERAWAVE-terads1-MIB › teradsx1CurrentCSSs

teradsx1CurrentCSSs

OID (symbolic): TERAWAVE-terads1-MIB::teradsx1CurrentCSSs

OID (numeric): 1.3.6.1.4.1.4513.11.1.1.6

Node type: OBJECT-TYPE

Type: Gauge32

Access: read-only

What is teradsx1CurrentCSSs?

Counts Controlled Slip Seconds for the current interval, seconds in which a frame slip occurred due to a timing or clock mismatch between this interface and its far end. Rising slip counts usually point to a clock source or synchronization configuration problem rather than a physical cable fault.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4513.11.1.1.6
snmpwalk -v2c -c public <target> TERAWAVE-terads1-MIB::teradsx1CurrentCSSs

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4513.11.1.1.6.1
snmpget -v2c -c public <target> TERAWAVE-terads1-MIB::teradsx1CurrentCSSs.1

Start monitoring Terawave DSL access multiplexer, T1/DS1 access interface card (T1 line-quality error counters) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TERAWAVE-terads1-MIB::teradsx1CurrentCSSs OID value, configure state conditions and alerts, and monitor any Terawave DSL access multiplexer, T1/DS1 access interface card (T1 line-quality error counters) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.4513	terawave	TERAWAVE-teraAccess-MIB

Numeric OID	Name	Module
1.3.6.1.4.1.4513.11	teraDs1Group	TERAWAVE-terads1-MIB
1.3.6.1.4.1.4513.11.1	teradsx1CurrentTable	TERAWAVE-terads1-MIB
1.3.6.1.4.1.4513.11.1.1	teradsx1CurrentTableEntry	TERAWAVE-terads1-MIB
1.3.6.1.4.1.4513.11.1.1.6	teradsx1CurrentCSSs	TERAWAVE-terads1-MIB

TERAWAVE-terads1-MIB :: teradsx1CurrentCSSs

teradsx1CurrentCSSs

Module

This MIB depends on