TERADICI-PCOIP-MIB

All MIBs › TERADICI-PCOIP-MIB

Organization: Teradici Corporation

Last Updated: 2008-01-28

Category: Zero Client and Thin Client

Description: Manages Teradici PCoIP zero client devices, reporting session state, display configuration, and network performance metrics.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is TERADICI-PCOIP-MIB?

TERADICI-PCOIP-MIB is a vendor-specific MIB from Teradici describing statistics for PCoIP (PC-over-IP), a protocol used in VDI (virtual desktop infrastructure) and zero-client remote display technology. It is intended to expose runtime PCoIP statistics such as session state and network performance metrics for a remote display connection, though the underlying module description gives no further table or object detail beyond identifying it as a statistics MIB. Its role is to monitor the software/session status of a PCoIP connection — things like whether a session is active, and network performance indicators such as latency, bandwidth, and packet loss that reflect remote desktop experience quality — rather than classic environmental hardware sensors. It is a self-contained Teradici enterprise MIB with no apparent dependency on shared IETF display or VDI standards. It is typically deployed on Teradici PCoIP zero clients or PCoIP host/agent software in VDI environments, polled by IT to track remote session quality. Engineers can download the TERADICI-PCOIP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in TERADICI-PCOIP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Teradici PCoIP zero clients
VDI host/agent endpoints

Monitoring Examples

No object or table names were provided in the available data for this module, so specific identifiers cannot be cited here. Based on its description as a PCoIP statistics MIB, an administrator would typically poll session-level counters for round-trip latency, bandwidth utilization, and packet loss on a Teradici zero client or PCoIP host, watching for rising latency or packet loss as an indicator of network congestion degrading the remote desktop experience. Without confirmed object names, this remains a general characterization rather than a specific polling example.

What Can Be Monitored

PCoIP session state
round-trip network latency
bandwidth utilization
packet loss

Imported Objects

From RFC1155-SMI

enterprises

From SNMPv2-SMI

Counter32
Counter64
Integer32
MODULE-IDENTITY
OBJECT-IDENTITY
OBJECT-TYPE

How to Use in IPNetwork Monitor

Example using pcoipStatisticsPcoipPacketsTransmitted OID:

Select a Teradici PCoIP zero clients, VDI host/agent endpoint (session/network-performance status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type pcoipStatisticsPcoipPacketsTransmitted into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports pCoIP packets transmitted during the current or most recent session. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
INT imagingStatisticsDisplayActive	1.3.6.1.4.1.25071.1.1.2.1.1.4	INTEGER	read-only	Whether display is active or inactive.
I32 imagingStatisticsDisplayHeight	1.3.6.1.4.1.25071.1.1.2.1.1.6	Integer32	read-only	Number of pixels the display is tall.
I32 imagingStatisticsDisplayRefreshRate	1.3.6.1.4.1.25071.1.1.2.1.1.7	Integer32	read-only	Display refresh rate in Hz
I32 imagingStatisticsDisplayWidth	1.3.6.1.4.1.25071.1.1.2.1.1.5	Integer32	read-only	Number of pixels the display is wide.
imagingStatisticsEntry	1.3.6.1.4.1.25071.1.1.2.1.1		not-accessible	An entry (conceptual row) in the imaging statistics table.
C64 imagingStatisticsFrameCount	1.3.6.1.4.1.25071.1.1.2.1.1.8	Counter64	read-only	Encoded frame count per display.
I32 imagingStatisticsIndex	1.3.6.1.4.1.25071.1.1.2.1.1.1	Integer32	read-only	The auxiliary variable used for identifying instances of the columnar objects in the statistics table.
INT imagingStatisticsSessionActive	1.3.6.1.4.1.25071.1.1.2.1.1.3	INTEGER	read-only	Whether the imaging session is active or inactive.
I32 imagingStatisticsSessionNumber	1.3.6.1.4.1.25071.1.1.2.1.1.2	Integer32	read-only	PCoIP session number used to link imaging statistics to PCoIP statistics.
imagingStatisticsTable	1.3.6.1.4.1.25071.1.1.2.1		not-accessible	The (conceptual) imaging statistics table.
pcoipStatisticsEntry	1.3.6.1.4.1.25071.1.1.1.1.1		not-accessible	An entry (conceptual row) in the PCoIP statistics table.
I32 pcoipStatisticsIndex	1.3.6.1.4.1.25071.1.1.1.1.1.1	Integer32	read-only	The auxiliary variable used for identifying instances of the columnar objects in the statistics table.
C64 pcoipStatisticsPcoipBytesReceived	1.3.6.1.4.1.25071.1.1.1.1.1.6	Counter64	read-only	PCoIP bytes received during the current or most recent session.
C64 pcoipStatisticsPcoipBytesTransmitted	1.3.6.1.4.1.25071.1.1.1.1.1.4	Counter64	read-only	PCoIP bytes transmitted during the current or most recent session.
I32 pcoipStatisticsPcoipLatency	1.3.6.1.4.1.25071.1.1.1.1.1.8	Integer32	read-only	Measured PCoIP latency in ms.
C64 pcoipStatisticsPcoipLostPackets	1.3.6.1.4.1.25071.1.1.1.1.1.7	Counter64	read-only	Detected lost PCoIP during the current or most recent session.
C64 pcoipStatisticsPcoipPacketsReceived	1.3.6.1.4.1.25071.1.1.1.1.1.5	Counter64	read-only	PCoIP packets received during the current or most recent session.
C64 pcoipStatisticsPcoipPacketsTransmittedEx	1.3.6.1.4.1.25071.1.1.1.1.1.3	Counter64	read-only	PCoIP packets transmitted during the current or most recent session.
I32 pcoipStatisticsSessionNumber	1.3.6.1.4.1.25071.1.1.1.1.1.2	Integer32	read-only	PCoIP session number used to link PCoIP statistics to imaging statistics.
pcoipStatisticsTable	1.3.6.1.4.1.25071.1.1.1.1		not-accessible	The (conceptual) PCoIP statistics table.
teraImagingStatistics	1.3.6.1.4.1.25071.1.1.2
teraMibModule	1.3.6.1.4.1.25071			MIB describing PC-over-IP (tm) statistics.
teraPcoip	1.3.6.1.4.1.25071.1.1
teraPcoipStatistics	1.3.6.1.4.1.25071.1.1.1
teraProducts	1.3.6.1.4.1.25071.1

RFC description

PC-over-IP (PCoIP) statistics for Teradici remote desktop protocol monitoring.

Start monitoring Teradici PCoIP zero clients, VDI host/agent endpoints (session/network-performance status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download TERADICI-PCOIP-MIB