TELTREND-MIB :: ccDetailsHoldupTime

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsTELTREND-MIBccDetailsHoldupTime

ccDetailsHoldupTime

Module: TELTREND-MIB

OID (symbolic): TELTREND-MIB::ccDetailsHoldupTime

OID (numeric): 1.3.6.1.4.1.293.2.4.37.1.1.10

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The time, in seconds, that active calls created from this call details should be held up after initial activation. The call will be held up for at least this time, unless cleared from the network. Thus, for example, PPP idle timeouts will not bring the call down.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.293.2.4.37.1.1.10
snmpwalk -v2c -c public <target> TELTREND-MIB::ccDetailsHoldupTime

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.293.2.4.37.1.1.10.1
snmpget -v2c -c public <target> TELTREND-MIB::ccDetailsHoldupTime.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.293.2.4.37.1.1.10.1 i <value>

Start monitoring Teltrend NiQ WAN test/access equipment (line-quality test configuration/results) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TELTREND-MIB::ccDetailsHoldupTime OID value, configure state conditions and alerts, and monitor any Teltrend NiQ WAN test/access equipment (line-quality test configuration/results) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.293teltrendTELTREND-MIB
1.3.6.1.4.1.293.2niqTELTREND-MIB
1.3.6.1.4.1.293.2.4modulesTELTREND-MIB
1.3.6.1.4.1.293.2.4.37ccTELTREND-MIB
1.3.6.1.4.1.293.2.4.37.1ccDetailsTableTELTREND-MIB
1.3.6.1.4.1.293.2.4.37.1.1ccDetailsEntryTELTREND-MIB
1.3.6.1.4.1.293.2.4.37.1.1.10ccDetailsHoldupTimeTELTREND-MIB