All MIBs › TELTONIKA-RUTX-MIB › ioInverted
ioInverted
Module: TELTONIKA-RUTX-MIB
OID (symbolic): TELTONIKA-RUTX-MIB::ioInverted
OID (numeric): 1.3.6.1.4.1.48690.6.2.1.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Is value of I/O inverted?
What is ioInverted?
This read-only value indicates whether the reported value of this I/O point is inverted (i.e., its logical sense is flipped relative to the raw physical signal). Admins need to know this when interpreting ioState correctly, so an 'active' physical signal isn't misread as inactive or vice versa.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.48690.6.2.1.8 snmpwalk -v2c -c public <target> TELTONIKA-RUTX-MIB::ioInverted
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.48690.6.2.1.8.1 snmpget -v2c -c public <target> TELTONIKA-RUTX-MIB::ioInverted.1
Start monitoring Teltonika RUTX series industrial/cellular router (hardware identity/firmware/modem status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TELTONIKA-RUTX-MIB::ioInverted OID value, configure state conditions and alerts, and monitor any Teltonika RUTX series industrial/cellular router (hardware identity/firmware/modem status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.48690 | teltonika | TELTONIKA-MIB |
| 1.3.6.1.4.1.48690.6 | gps | TELTONIKA-MIB |
| 1.3.6.1.4.1.48690.6.2 | latitude | TELTONIKA-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.48690.6.2.1 | ioEntry | TELTONIKA-RUTX-MIB |
| 1.3.6.1.4.1.48690.6.2.1.8 | ioInverted | TELTONIKA-RUTX-MIB |