All MIBs › TELESTE-LUMINATO-MIB › signalSnr
signalSnr
Module: TELESTE-LUMINATO-MIB
OID (symbolic): TELESTE-LUMINATO-MIB::signalSnr
OID (numeric): 1.3.6.1.4.1.3715.17.3.2.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Recent signal to noise ratio in 1/10th of dB.
What is signalSnr?
The most recently measured signal-to-noise ratio (SNR) of the incoming signal on this interface, expressed in tenths of a dB, so a reported value of 350 means 35.0 dB. Operators watch this to judge whether a tuned RF or satellite input has adequate margin before demodulation errors start appearing.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3715.17.3.2.1.2 snmpwalk -v2c -c public <target> TELESTE-LUMINATO-MIB::signalSnr
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3715.17.3.2.1.2.1 snmpget -v2c -c public <target> TELESTE-LUMINATO-MIB::signalSnr.1
Start monitoring Teleste optical nodes with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TELESTE-LUMINATO-MIB::signalSnr OID value, configure state conditions and alerts, and monitor any Teleste optical nodes from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3715 | teleste | TELESTE-ROOT-MIB |
| 1.3.6.1.4.1.3715.17 | luminato | TELESTE-ROOT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3715.17.3 | interface | TELESTE-LUMINATO-MIB |
| 1.3.6.1.4.1.3715.17.3.2 | signalPhysTable | TELESTE-LUMINATO-MIB |
| 1.3.6.1.4.1.3715.17.3.2.1 | signalPhysEntry | TELESTE-LUMINATO-MIB |
| 1.3.6.1.4.1.3715.17.3.2.1.2 | signalSnr | TELESTE-LUMINATO-MIB |